Lucas belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Hoshiro was a legendary blacksmith. Few had the great honour of using one of his creations, but the prestige it gave made even the noblest families jealous. Passed down from generation to generation, his mysterious technique produced a blade of perfect edge, and the handle was made specifically for the one it was destined to. Many wished to buy these sabres, but the smith had a golden rule: only the worthy would be allowed to use the swords. Thus, only the purest of souls could pretend to the title of first owners of these weapons, and all knew their names. This allowed the katanas, if stolen, to be found almost immediately. This new Calimacil katana includes the most important elements of the old one: the Calimacil foam, both extremely durable and safe. However, the weapon now has a new, thinner blade, steel-coloured with silver accents. The handle is now white the wrappings are black for a contrasting look. Golden details such as the pommel have been added for a renewed realism. This katana’s tsuba can be changed with any one of our other tsubas, so your weapon can be truly unique. Important: Don't forget to get a tsuba for your katana sword. These are sold separately, please see below at "Accessories". Every oriental character will want to put his hands on the noble efficiency of this sword. Those who are from high birth and other nobles who wish to show their prestige will especially appreciate this weapon, known to all. The adventurer using this swords is sure to have a pure heart… or to have successefully plotted an evil plan. Material: foam, fiberglas Total length: 114 cm Blade length: 81 cm Weight: 525 g All items made by the manufacturer "Calimacil" are hand-crafted in Canada. We´re always trying to keep every item in stock, unfortunately there may still be waiting periods up to 10 weeks for out of stock items. Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events, theater stages etc.. The foam weapons are made with a glass reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

"Mina" was made as an armour for women. Naturally we had to resign from historical patterns, as equality was not that popular amongst the medieval knight. Today we are proud to announce, that there is a way to dress strong women for the battlefield - using this armour set, you will not only be good looking on the field of glory, ladies! The "Mina" armour resebles large parts of our well known "Balthasar" series. The edges with decorative rivets are a continuous detail. Both series can be combined to get a resembeling look. We offer the armour series in a set for a lowered price. The slick pattern with lots of waves and cuts, just as the high movability and comfort when wearing it combine the attractive design with functionality. This set includes: Chestplate, Gorget, Spaulders, Armour BeltMaterial: 1.2 mm steel Measurements of this armour set: -Chest Plate: Circumference: min. 69 cm, max. 89 cm Length: 19 cm Width: 44 cm Weight: app. 1040 g Colour: blank -Plate Gorget: Circumference (neck): 44 cm Length: 37 cm Width: 25,5 cmWeight: app. 800 g Colour: blank -Spaulders: Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank -Armour Belt: Circumference: min. 85 cm, max. 98 cm Width: 18 cm Weight: app. 1250 g Colour: blank

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The breastplate is composed of two inflexible pieces and has an extra short cut. It is closed crosswisely with two leather straps on the back and therefore quite variable in its size. Additionally you can bend it carefully to make it fit to the young wearers circumference.Material: Steel 1mmColor: blank or browned

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers. A great basis for "dark" characters, but they are also suitable as a contrast for brighter costumes. The "Lucas" set of bracers and greaves was specially designed for children and adults with a really small circumference on arms and legs. They are shorter and smaller in diameter, but can "grow" with the wearer by carefully bending them open a little. Just like all pieces from the "Lucas" range, they are built with a stiffening ridge along the edges and are being closed with two straps on each piece. We suggest to wear padded bracers and greaves underneath to avoid scratches and bruises when playing outside. Not only does this maximise comfort, but also protects the skin and bones. Measurements: Lucas bracers:Length: 20cm Width (top): 15cm Width (bottom): 12cmWeight: app. 0,7kg Lucas greaves: Length: 25cm Width (top): 20cm Width (bottom): 15cm  Weight: app: 1,1kg Colour: blank This set contains the bracers (blank) and the greaves (blank) from the "Lucas" series.

Simple, but simply good! The Aaron cloak has a plain classic cut, a large hood and is closed with a button.Made from sturdy cotton canvas it protects you against wind and rain. The amazing price-performance ratio makes it one of our most favoured articles. The cloak comes in various colours so it matches almost all types of costumes. A faithful companion for a real good price! UnisizeLength: aprox. 140 cmFabric: 100% CottonWeight: 1,3 Kg