Lena chest plate

€89.90*

Delivery time 2-5 days

Size
Product number: 970096
Our benefits
  • Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
  • Great Quality for low prices
  • Choose from 5.000+ items
Product information "Lena chest plate"

The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.
The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.

Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.

Material: 1.2mm steel
Colour: blank
Size:
S-M: up to B cup, breast circ. 85-107 cm
L-XL: up to D cup, breast circ. 110-126 cm

Accessory Items

Ballistol spray
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

€3.90*
Gold Quality leather grease
Leather is a very versatile material with lots of different properties. Shoes, accessories and armour can last, if maintained propperly, for many years. The "Gold Qualities" leather greases effectiveness is defined by its high percentage of bees wax - this is another reason for it cleaning your leather so good. It penetrates depply into the leather and seals it from dirt and moisture. Rub it gently into the leather by using a soft brush or cloth. After a short residence time the excessive grease is brushed off - appling too much grease will result in a saturation; the superfluent grease can be wiped off. Your leather product will let you know when you apply too much: we suggest to apply less grease, but more often. Not only leather can be taken care off with this grease, we suggest to clean steel armours light rust or polish drinking horns with it. Wooden articles profit from its bees wax ingredients as well. They will be protected effectively and recieve a new shine. Material: vaseline, bone marrow oil, genuine bees wax Colour: natural Volume: 190 ml  

€8.90*

Customers also viewed

Edward full arm guard Discontinued
Discontinued, only while stocks last   The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€129.90*
Mina chestplate
A delicate piece of armour for women.The straps for the shoulders and breast parts are attached to a small shield in the back. This way it fits tightly and is also adjustable in size. The cups were made in "B" size, so this armour is made for slim women only.The armour is framed by a deepening with decorative rivets.This element allows several Mytholon plate armours to match with the "Mina" series.Material: 1.2mm steelColour: blank, browned

€99.90*
Lucas gorget
This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget. Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage. Material: 1.2mm steelColour: blank

€49.90*
Lena gorget
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr

€29.90*
Berthold sallet
This helmet shows a high, pointed scull piece with an enlongened neck protection. The part on the forehead is riveted to the helmet and provides an additional protection to the wearer. The scull part is made with a spine.The visor can be moved upwards to allow a better breathing for the wearer in between battle moments.The helmet is made with an inner inlay of foam (covered in cotton) and has a chin strap attached.The sallet is a very common helmet type for the late medieval period and was often worn in combination with gotic armourment. It was used later as well, especially by bandits and sellswords, who scavaged them off the battlefield.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€119.90*

Customers also bought

Lena spaulders
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series spaulders have an elegant curved upper arm part and a great cut on the shoulder piece by having the blade breakers added on top of them. This stable riveted blade breaker does not only add a martial look to the wearer, but makes the wearer a little wider. A well-fortified look is added to the wearer. All edges and points are beaded for extra protection and comfort for the wearer.Material: 1.2mm steelWidth: 35cmLength: 32cmWeight: app. 2.5kg

€119.90*
Lena choker
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr

€19.90*
Lena gorget
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr

€29.90*