Lucas gorget

€49.90*

Delivery time 2-5 days

Product number: 970090
Our benefits
  • Free shipping from 100€ (DE only)
  • Express-Shipping within 24h (Mo-Fr)
  • Choose from 5.000+ items
Product information "Lucas gorget"

This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.
The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget.

Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage.

Material: 1.2mm steel
Colour: blank

Customers also viewed

%
Edward full arm guard Discontinued
Discontinued, only while stocks last   The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges

€64.95* €129.90* (50% saved)
Lucas bracers blank
The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The bracers are designed similar to our bracers "Adam" but are cut smaller. They are closed with two buckle straps on the back. To make them fit to the wearer´s arms you can also carefully bend them a little bit. Material: 1mm steel

€29.90*
Lucas greaves browned
The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The greaves are designed similar to our greaves "Adam" but are cut smaller. They are closed with two buckle straps on the back. To make them fit to the wearer´s legs you can also carefully bend them a little bit. Material: Steel 1mm

€39.90*
Kaspar gorget
The "Kaspar" gorget has a standing collar, and is unlike most others worn underneath the "Kaspar" Torso armour. The browned areas, in combination with the blank bordering, up grade the browned variant. Being made along patterns from the mid 16th to mid 17th century, the german horse riders armour can be used for a wide range of various characters and costumes. Material: 1,2mm steelColour: blank, browned with blank bordering

€89.90*

Customers also bought

Gustav belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

€11.90*
Lyra fibula
This pretty fibula is used as fastener for cloaks and capes, but can also be attached just for decoration. It is made of robust steel and therefore also suitable for slightly thicker fabrics like wool.Material: SteelDiameter small fibula: 8cmDiameter large fibula: 10cm

Variants from €12.50*
€15.90*
Doran ring belt
European belt buckles have been dated back to the Roman Empire. Prior to the buckle the roman and germanic people used a ring, made from various materials. This shape of buckle was used until the medieval period. The "Doran" series' ring belt copies this shape of buckle. The belt is made from split leather and grades almost every costume up, as the characteristic medieval knot shows the wearer linked to this period. The belt is tightened by pulling the strap through the ring a little more, than needed and securing it right behind it. The upper end is pulled through the loop then and lead to to the bottom - simple as it sounds: this is it! The knot is tightened and stays in place now. We advice to use leather fat on a regulat basis for the caretaking of split leather. Our "Gold Quality" leather fat will certainly be the best choice. Material: split leather Length: 140 cm Width: 4 cm Colour: black, brown Weight: app. 170 g

€21.90*