Wyverntooth amulet

€10.00*

Delivery time 2-5 days

Product number: 960324

Our benefits

Free shipping from 100€ (DE only)
Express-Shipping within 24h (DE)
Choose from 5.000+ items

Product information "Wyverntooth amulet"

The "Wyverntooth" amulet is made of bone and hand carved after examples of the Viking Age. It's a special accessory not only for Vikings and norse characters, it also goes well with barbarians, orcs, warriors and adventurers. Even wizards can use this amulet ideal as a talisman or magic focus. Not only in the LARP or on the medieval market, this bone amulet is a fancy jewelry.

Material: Bone

Dimensions: 7 cm x 1.5 cm
Length of the leather strap, approx. 100 cm

Customers also viewed

Storolf bone needle

"Storolf" is a replica of a Viking-age bone needle from the 11th century, based on an original find from Trondheim, Norway. It is hand-carved and features elaborate carvings based on the "Urnes" style. Bone needles like this can be found throughout Viking settlements at sites such as Birka, Haithabu, Trondheim and York. Needles like "Storolf" were used to close cloaks and also worn as hairpins. The small hole in the needle could be used as an eyelet to pull through a thread, so the needle could be used for repairing fishing nets. Material: BoneLength: 16cmWidth: 3cmThickness: 0.6cm

€13.90*

Yrsa pendant with runes

A rustic talisman of the Vikings, a so called "Oegishjalmr" from rustic cast brass. Diameter 3.9 cm

€1.50*

Pendant key

A pretty pendant in the shape of a key. Material: Bronze Length: 4cm

€7.90*

Spiral necklace

A pretty little pendant made of steel and shaped like a spiral. It comes with a round robust leather strap that can be used to wear it as a necklace or to tie it onto belts and pouches for decoration.Material: Leather, steel Size: spp. 8 cm

€4.90*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

€0.49*