The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: Steel Length: 29 cm
Width Top: 18 cm
The Katharina greaves feature a classic cut adorned with a graceful curved element, echoing the design found on the bracers and tassets of the Katharina armour. They are secured with two sturdy straps, allowing for adjustable sizing.
All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.
Material: Steel Length Side: 26 cmLength center front: 33,5 cmWidth at ankle: 12 cm
The bracers of the Katharina armour are designed with a shorter length, seamlessly aligning with the elbow tile of the modular arm guard. They are adorned with a graceful curved element, mirroring the design found on the greaves and tassets. These bracers are also available in an economical set with the greaves.All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.Material: Steel
Length (Side): 17.5 cm
Length (Center): 22 cm
Width (Wrist): 11.5 cm
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is fastened with a wide leather strap at the back. The size of the armour belt can be adjusted individually using the strap and by carefully bending it. The tassets are attached to the four front straps, which we offer separately, as well as in a convenient set along with the armour belt. Other tassets from our 'Mytholon Artware' armours can also be combined with these armour belts, such as Lambert, Galahad, Ortwin, or Edward.
All parts of this armour are naturally fluted to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel off over time. We recommend regular maintenance with oil, such as the Ballistol available from us.
Material: Steel.Width Center Front: 22,5 cmWidth Side: 9,5 cmLength Metal: 66 cmEntire Length: 83 cm - 115 cm
The arm guard of the Katharina armour is a modular set and already includes the spaulders. You can decide whether you want to wear only the spaulders, the spaulders with an additional upper arm segment or as a complete arm guard together with the shaped elbow tile. All segments are connected with straps and buckles, so you can adjust the arm guard optimally to your arms. Of course, all parts of the armament are flanged to ensure the safety of you and your fellow players. On the inside, the parts have been painted to protect against rust. This varnish can peel off over time. We recommend regular care with oil, e.g. with Ballistol, which is available from us. Material: Steel, LeatherLength top shoulder plate: 19cmWidth top shoulder plate: 31 cmLength entire spaulder: 40 cm to 26 cm (adjustable)
The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: SteelLength: 29 cm
Width Top: 18 cm
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is fastened with a wide leather strap at the back. The size of the armour belt can be adjusted individually using the strap and by carefully bending it. The tassets are attached to the four front straps, which we offer separately, as well as in a convenient set along with the armour belt. Other tassets from our 'Mytholon Artware' armours can also be combined with these armour belts, such as Lambert, Galahad, Ortwin, or Edward.
All parts of this armour are naturally fluted to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel off over time. We recommend regular maintenance with oil, such as the Ballistol available from us.
Material: Steel.Width Center Front: 22,5 cmWidth Side: 9,5 cmLength Metal: 66 cmEntire Length: 83 cm - 115 cm
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelColour: blank, browned
The "Diana" gambeson is a specialty in our line of products due to
its design. With 6 lacings in the front and its sidecuts, it can easily
be adjusted to the wearer. The long sleeves are closed with an
additional lacing. The different stitchings let you move freely while
providing protection against rashes and bruises. The gambeson is lined with light cotton.
Material: Cotton, polyester, leatherSize: S-XXL
The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar.
Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm
Weight: 1 kg
Colour: blank, browned
The "Felice" blouse is made from light cotton and has wide cuffs. It is perfect for combinations with skirts and vests. It is closed by means of strings in the front.Material: 100% Cotton
€24.89*
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 50€ (DE) / 150€ (FR,IT,ES+)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...