Edward spaulders 2nd edition browned/blank

€139.90*

Delivery time 2-5 days

Product number: 963016
Our benefits
  • Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
  • Great Quality for low prices
  • Choose from 5.000+ items
Product information "Edward spaulders 2nd edition browned/blank"
This pair of massive spaulders is built with additional blade turners attached on top of the shoulder parts. This makes every wearer appear even bigger. The spaulders are built from two parts (shoulder and upper arm) and are being attached on the collar or torso of an exsisting armour and fixed to the wearers upper arm to hold them in place. This way they stay in place and will disturb the wearers movement only a little. The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.
Material: 1,2mm steel
Length: 35 cm
Width: 52 cm

Customers also viewed

Edward spaulders 2nd edition blank
This pair of massive spaulders is built with additional blade turners attached on top of the shoulder parts. This makes every wearer appear even bigger. The spaulders are built from two parts (shoulder and upper arm) and are being attached on the collar or torso of an exsisting armour and fixed to the wearers upper arm to hold them in place. This way they stay in place and will disturb the wearers movement only a little. The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably. Material: 1,2mm steel Length: 35 cm Width: 52 cm

€129.90*
Edward torso armour 2nd edition browned/blank
The "Edward" torso armour is inspired by the typical armours of the High Middle Ages. The segmented breastplate is highly movable, dominated by dynamically curved lines. Decorative grooves and rivets give the armour a noble yet menacing character. The thigh guards of the Edward series can be attached to straps on the lowermost segment of the breastplate. This armour is suitable for portraying paladins and knights, as well as mercenaries or adventurers. It can be combined with any shoulder armour from our range. The recommended waist circumference is 126 cm (including gambeson) – however, the armour can be widened up to a maximum of 144 cm with leather straps attached on the sides. Material: 1.2 mm steel Chest circumference: 115-125 cm Total length: 66 cm Shoulder width: 33.5 cm Hip circumference: 125-146 cm

€349.90*
Edward torso armour 2nd edition blank
The "Edward" torso armour is inspired by the typical armours of the High Middle Ages. The segmented breastplate is highly movable, dominated by dynamically curved lines. Decorative grooves and rivets give the armour a noble yet menacing character. The thigh guards of the Edward series can be attached to straps on the lowermost segment of the breastplate. This armour is suitable for portraying paladins and knights, as well as mercenaries or adventurers. It can be combined with any shoulder armour from our range. The recommended waist circumference is 126 cm (including gambeson) – however, the armour can be widened up to a maximum of 144 cm with leather straps attached on the sides. Material: 1.2 mm steel Chest circumference: 115-125 cm Total length: 66 cm Shoulder width: 33.5 cm Hip circumference: 125-146 cm

€329.90*
Edward full legguard 2nd edition browned/blank
The 'Edward' leg guard is designed large enough to be worn by warriors with sturdy legs. It can be supplemented with an additional layer of padding for larger fighters to complete the plate armour. It is secured with a strap to the belt. Material: 1.2mm steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€129.90*
Edward full armguard 2nd edition browned/blank
The 'Edward' arm guard is large enough to be worn over a gambeson and chainmail. The upper segment is fastened to the inside of the shoulder plate. Material: 1.2mm steel Length: 54 cm Upper width: 48 cm Lower width: 33 cm"

€129.90*

Customers also bought

%
Kaspar tassets
The "Kaspar" tassets are made from 7 flexible connected lamellae and fit to the "Kaspar" Torso armour, but can be worn on others too, the given rims assumed. The browned areas, in combination with the blank bordering, up grade the browned variant. Being made along patterns from the mid 16th to mid 17th century, the german horse riders armour can be used for a wide range of various characters and costumes. Material: 1,2mm steelColours: blank, browned with blank bordering Width25Length34 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Variants from €111.92*
€119.93* €149.90* (19.99% saved)
Hilde fibula
The "Hilde" fibula made from bronze adds a smaller decorative fibula to our line of products by demand. It can for example be used to fix our arm wraps or puttees. Material: BronzeLength: 2,8cmWidth: 3,2cmLength of thorn: 4cm

€6.50*
Connor chainmail greaves oiled
The "Connor" chain greaves are inspired by historical finds and offer the protection of chain mail in combination with the comfortable wearing of leather greaves . They are closed at the back with 2 leather straps & buckles. The chain mesh is sewn all around with the greaves and edged with suede. We recommend combining them with padded greaves or leg wraps to protect against bruises and abrasions.In this variant, the chain mesh is only oiled to protect against rust. So if you want a rusty look, e.g. for robbers or orcs, you can remove the oil from the chain mesh and then let it rust.Material: leather, steelDimensions: 28 cm x 24 cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

€59.90*