Adam belt shield blank

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

This small belt shield completes the "Galahad" torso armour.Use the two buckles to strap it to the centre part of the chest plate and to cover up the unprotected parts in your crotch.It may be a small armour piece, but it brings a huge effect to any armour, as it can be used to paint heraldic colours on it. This shield can also be added to any exsisting armour, but may need some handiwork to get it attached.Material: 1,2mm steelColour: blankSize: onesize

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g 

The large spaulders of the "Markward" series have a long upper arm segment, which is attached to the generously designed shouldersegmenet. The deceived drawers not only serve the ornament, it also gives additional stability. The excellent price make the big shoulders "Markward" special. Their imposing, carefully shaped shoulder segments are ideal for the addition of heavy armor. Of course, these shoulders are compatible with all Mytholon gorgets. Material: 1, 2mm steelLength: 30 cmWeight: 2 kgColour: blank, browned

The large spaulders of the "Markward" series have a long upper arm segment, which is attached to the generously designed shouldersegmenet. The deceived drawers not only serve the ornament, it also gives additional stability. The excellent price make the big shoulders "Markward" special. Their imposing, carefully shaped shoulder segments are ideal for the addition of heavy armor. Of course, these shoulders are compatible with all Mytholon gorgets. Material: 1, 2mm steelLength: 30 cmWeight: 2 kgColour: blank, browned

This western duster is part of our Abraxas series. Good to combine with any robe or habit.The raincape-like collar is equipped with a hood. The duster is closed with a single button on your neck.Sizes: S/M and L/XLFabric: 100% Cotton

The vest "Orthello" is made of soft suede. It is closed on the front side with roller buckles. These can also be used to individually adjust the vest to the wearer's size. To improve mobility, it is slitted on the back. "Orthello" is a wind-proof and robust upper garment that offers many combination possibilities. It may be complemented with hoods and collars and wears well under a leather armour or over a chainmail shirt. Many cosume ideas can be realized using this vest as a basis.Material: leatherLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

Simple, but simply good! The Aaron cloak has a plain classic cut, a large hood and is closed with a button.Made from sturdy cotton canvas it protects you against wind and rain. The amazing price-performance ratio makes it one of our most favoured articles. The cloak comes in various colours so it matches almost all types of costumes. A faithful companion for a real good price! UnisizeLength: aprox. 140 cmFabric: 100% CottonWeight: 1,3 Kg