Angus fibula big

The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET Capacity: 1.5 litres Length: 25 cm Width: 8 cm Weight: approx. 400 g  This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

Attention: The upper seam on the hip is really wide. Do not wonder, but see the Rus pants cut as an authentic (and surprisingly: very comfortable) way of wearing them. These pants were made following the example set by the Rus-pants. A early viking pattern, that allows enormous movement. The pants are being tied on the waistband and just below the knee. The calf is fitted tight, so you can also use northmans' style puttee for the calfs.The measurements are made along the calf parts, depending on the circumfence of your calfs to fit through.Material: 100% Cotton XS/S M L/XL Hem circumference 120 134 146 Calf circumference 42 44 48 Inner leg length 79 85 92 All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.

Fibulas are used ever since the bronze ages to close clothing on the wearers body often referred to as "the buttons before there were buttons". They were used up to the late medieval period, until the button and buttonhole were introduced. Used as jewlery, they were often decorated rich.Our "Sylvana" fibula is such a decoration fibula. As with all our steel and iron ware, they are made by hand. The fibula is beatifully decorated with leaves on its end. The ring is completly torqued. It was sanded down only a little to keep the rough, wrought iron, look.All our cloaks and coats can be worn with a fibula, as long as you remove the buttons and decide to poke through the fabric with the long thorn.Material: steelDiameter (outer): 7,5cmWeight: 75gr

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned