A simple arrowhead made from steel - in the look of wrought iron. This arrowhead is a modern copy of the well known Bodkin-Tip, but a little shorter. The rear end allows the head to be put on a wooden shaft.
This arrowhead has a square area and is armour-piercing. Made along the exsample set by historic archery, it was used as an armour-piercing distance weapon on all european battlefields.Material: Steel
A metal hunting-arrowhead made along the example set by historic archery. A lean blade with two long wings is typical for this sort of tip. These heads were used for hunting purposes, due to their ability to cut through thick skin and fur.Material: Steel
This hook can be used to hang camp-equipment, as well as individual equipment up. It arranges stuff inside the tent and provides order to pots, pans and all other camp-utensils.Material: SteelSize: between 8cm and 9cmThis article is hand-forged and can therefore vary in size and shape.
This moon-shaped arrowhead was used to cut ships' rigging and enemies' ropes in the past days.Hits to the body were especially devastating, due to the big diameter of the blade.Made along the example set by historic archery.Material: Steel
This arrowhead has a square area and is armour-piercing. Made along the exsample set by historic archery, it was used as an armour-piercing distance weapon on all european battlefields.Material: Steel
A metal hunting-arrowhead made along the example set by historic archery. A lean blade with two long wings is typical for this sort of tip. These heads were used for hunting purposes, due to their ability to cut through thick skin and fur.Material: Steel
This fibula is a nice accessory for any kind of costume. And it\\'s available for a very reasonable price. The thorne is pushed through the fabric and then closed by rotating the fibulas\\' arms.The endings are flattened and by that somewhat adornable.Measurements: Thorn app. 10cmDiameter: app. 8cmThe sizes of each single fibula may vary due to the manual production of this item.You may want to take a look at our other fibulas.
This moon-shaped arrowhead was used to cut ships' rigging and enemies' ropes in the past days.Hits to the body were especially devastating, due to the big diameter of the blade.Made along the example set by historic archery.Material: Steel
The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET
Capacity: 1.5 litres
Length: 25 cm
Width: 8 cm
Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.
49,90 €*
Más de 25 años de experiencia
Selección entre 5.000+ artículos
Envío gratis a partir de 150€ (ES+)
Envío rápido, incluso al extranjero
Este sitio web utiliza cookies para garantizar la mejor experiencia posible. Más información...