Envío gratuito a partir de 100€ (DE)
Entrega exprés en 24 horas (Lu-Vi)
Más de 25 años de experiencia
Selección entre 5.000+ artículos

Balthasar belt shield

13,90 €*

Artículo actualmente agotado - En producción

Color
Avísenme cuando el producto vuelva a estar disponible.
Número de producto: 971105
Nuestras ventajas
  • Envío gratuito a partir de 100€ (DE)
  • Envío exprés en 24h (L-V)
  • Elija entre más de 5.000 artículos
Información sobre el producto "Balthasar belt shield"

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now.

Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint.

Material: 1.2 mm steel
Length: 24 cm
Width: 18 cm
Weight: app. 350 g
Colours: blank, browned

Accessory Items

Ballistol spray
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

3,90 €*

Kunden haben sich auch angesehen

Adam belt shield blank
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

11,90 €*
Solo 2 disponible
Gustav belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

11,90 €*
Wilhelm armshield small
The small "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 23 cm Width: 17 cm Weight: app. 0,5 kg Colours: blank, browned

12,90 €*
Galahad belt shield
This small belt shield completes the "Galahad" torso armour.Use the two buckles to strap it to the centre part of the chest plate and to cover up the unprotected parts in your crotch.It may be a small armour piece, but it brings a huge effect to any armour, as it can be used to paint heraldic colours on it. This shield can also be added to any exsisting armour, but may need some handiwork to get it attached.Material: 1,2mm steelColour: blankSize: onesize

11,90 €*
Markward belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

13,90 €*

Kunden kauften auch

Leopold padded greaves
These padded greaves provide comfort! Worn underneath steel greaves your armour will be way "lighter" and more comfortable.The greaves are being closed by leather strings on your calf.Sold in pairs.Material: Canvas, PolyesterLength: 42cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

14,90 €*
Ansgar shirt canvas cream
Pirates shirt, medieval shirt...This shirt is known by many names. Developed in the Renaissance, brave musketeers, pirates and swashbucklers, but also flower power kids from the 1960s\\' have worn similar models. Ever since the fantastic and medieval world has us wearing costumes - this shirt got certain place in every wardrobe and is suitable for many costumes.Made from heavy cotton by Mytholon, this shirt is available in a wide variety of colours and builts a foundation for many different costumes - be it fantastic or historic.The lace tying allows the shirt to be worn open when warm and tied close when cold outside. The sleeves are cut very wide and \\"puffy\\", allowing movement when fighting or dancing. The wide cuffs are being closed with a lace.It is a shirt for many occasions, not only as a costume, but also as a leisure time piece...Material: cotton canvasSizes: from S to XXL

34,90 €*
Ketill pants canvas black
Attention: The upper seam on the hip is really wide. Do not wonder, but see the Rus pants cut as an authentic (and surprisingly: very comfortable) way of wearing them.These pants were made following the example set by the Rus-pants. A early viking pattern, that allows enomous movement. The pants are being tied on the waistband and just below the knee. The calf is fitted tight, so you can also use northmans' style ties for the calfs.The folds on the hip are moved around the waistline and the pants tied even closer.The measurements are made along the calf parts, depending on the circumfence of your calfs to fit through.Material: 100% CottoncanvasSizes: XS/S; M and L/XL

34,90 €*
%
Dragomir spaulders blank
The "Dragomir" plate armor is incredibly elaborate. It consists of a multitude of lames and finely shaped elements which, when combined, result in extraordinary armor that can hardly be more agile. Every part by "Dragomir" is carefully flanged, decorated with beads and coordinated with one another. They impress with their shape and the masterful execution that makes this armor so unique. If you like it a little less decorated and want to save some money, you should check out "Dragomir's" brother "Rikomer". Technically identical, "Rikomer" dispenses the decorative beads in favor of a more brutal look and a lower price.Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for series production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. In blank, "Dragomir" is particularly suitable for dragon knights or fighters of light.We generally recommend wearing a gambeson and arm & leg paddings under plate armour. This significantly improves wearing comfort and protection.Material: 1,2 mm steel, leatherWidth inner shoulder segment: 25 cmWidth outer shoulder segment: 30 cmLength: 39cmWeight pair: 5 kg

104,93 €* 149,90 €* (ahorro del 30%)
Markward gorget
The gorget of the "Markward" series is not only special because of its rather technical design, it also differs in its construction from conventional plate gorgets. By a flexibly suspended throat element, the size can be varied there. This avoids that the gorget scrubs and presses on the throat. In addition, the two-part gorget was movably joined in the neck area. This also increases the wearing comfort significantly. The gorget "Markward" is well suited for all armor wearers who value functionality and comfort. Material: steelLength: 52 cmLength front part: 21cmTotal width: 38cmWeight: 3.8 Kg

34,90 €*