Edward full legguard 2nd edition browned/blank

129,90 €*

Tiempo de entrega 2-5 días

Número de producto: 963014
Nuestras ventajas
  • Envío gratuito a partir de 150€ (ES+)
  • Más de 25 años de experiencia
  • Elija entre más de 5.000 artículos
Información sobre el producto "Edward full legguard 2nd edition browned/blank "
The 'Edward' leg guard is designed large enough to be worn by warriors with sturdy legs. It can be supplemented with an additional layer of padding for larger fighters to complete the plate armour. It is secured with a strap to the belt.
Material: 1.2mm steel
Middle of knee to outer edge of thigh52.5
Middle of knee to inner edge of thigh34
Metal width at thigh33
Middle of knee to lower edge middle22
Metal width at bottom22
Total lengthca. 73

All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Los clientes también vieron

Edward full legguard 2nd edition blank
The 'Edward' leg guard is designed large enough to be worn by warriors with sturdy legs. It can be supplemented with an additional layer of padding for larger fighters to complete the plate armour. It is secured with a strap to the belt. Material:  steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

124,90 €*
Edward full armguard 2nd edition browned/blank
The 'Edward' arm guard is large enough to be worn over a gambeson and chainmail. The upper segment is fastened to the inside of the shoulder plate. Material: 1.2mm steel Length: 54 cm Upper width: 48 cm Lower width: 33 cm"

129,90 €*
Edward Armpanzer 2nd Edition blank
"The 'Edward' arm guard is large enough to be worn over a gambeson and chainmail.The upper segment is fastened to the inside of the shoulder plate. Material: 1.2mm steel Length: 54 cm Upper width: 48 cm Lower width: 33 cm"

124,90 €*
Edward torso armour 2nd edition blank
The "Edward" torso armour is inspired by the typical armours of the High Middle Ages. The segmented breastplate is highly movable, dominated by dynamically curved lines. Decorative grooves and rivets give the armour a noble yet menacing character. The thigh guards of the Edward series can be attached to straps on the lowermost segment of the breastplate. This armour is suitable for portraying paladins and knights, as well as mercenaries or adventurers. It can be combined with any shoulder armour from our range. The recommended waist circumference is 126 cm (including gambeson) – however, the armour can be widened up to a maximum of 144 cm with leather straps attached on the sides. Material: 1.2 mm steel Chest circumference: 115-125 cm Total length: 66 cm Shoulder width: 33.5 cm Hip circumference: 125-146 cm

329,90 €*
Edward torso armour 2nd edition browned/blank
The "Edward" torso armour is inspired by the typical armours of the High Middle Ages. The segmented breastplate is highly movable, dominated by dynamically curved lines. Decorative grooves and rivets give the armour a noble yet menacing character. The thigh guards of the Edward series can be attached to straps on the lowermost segment of the breastplate. This armour is suitable for portraying paladins and knights, as well as mercenaries or adventurers. It can be combined with any shoulder armour from our range. The recommended waist circumference is 126 cm (including gambeson) – however, the armour can be widened up to a maximum of 144 cm with leather straps attached on the sides. Material: 1.2 mm steel Chest circumference: 115-125 cm Total length: 66 cm Shoulder width: 33.5 cm Hip circumference: 125-146 cm

349,90 €*

Clientes que también compraron

Edward greaves 2nd edition browned/blank
The greaves for our revised Edward armour. Material: Steel Length: 34.5 cm Upper width: 27 cmLower width: 24 cm

59,90 €*
%
Tilly cloak cotton red Discontinued
Discontinued, only while stocks last The cloak "Tilly" already comprises the first half for all "cloak-and-dagger"-inspired outfits ‒ if you'll allow the crude pun; the fact is that this hip-length shoulder cape contributes greatly to the visual appearance of any outfit resembling musketeers or any other rapier or dagger wielding hero of the 17th century. It is worn over one shoulder and held in place with a strap beneath the other arm. This allows freedom for the sword arm so the wearer can dance with beguiling ladies or quarrelsome villains. Made of strong premium cotton fabric, it is a faithful companion even in tight spots. It is well up to shielding the wearer from light rain, but bear in mind that it is an accessory rather than functional apparel. Rogues, charming heroes and heroines, but also merchants and highborn lords and ladies are always well clad with the Tilly cloak. Material: 100 % cotton Length: approx. 90 cm Width: approx 240 cm 

24,95 €* 49,90 €* (ahorro del 50%)
Kaspar helmet
The "Kaspar" helmet is a typical burgonet from the riders armor around 16th to 17th century. The facial protection is closed with a leather strip in front of the face, they are designed with holes to allow better hearing. The browned areas, in combination with the blank bordering, up grade the browned variant. Being made along patterns from the mid 16th to mid 17th century, the german horse riders armour can be used for a wide range of various characters and costumes. Material: 1,2mm steelColours: blank, browned with blank bordering Head circumference (inside helmet)59.5 - approx. 63Length in the neck10 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Variantes de 139,90 €*
149,90 €*
Kaldor helmet
The helmet Kaldor matches our series Edward perfectly. Same as the helmet Edward its design is based on historical great helmets, but with different shaped eye slits. The front is separately accentuated in this helmet and the top part is adorned with four decorative plates like a crown. On the back it has got a felixble plate that covers the back of the head. Material: Steel 1,2mmColour: blank, browned with blank areas

Variantes de 129,90 €*
149,90 €*
Chain coif aluminium flat ring riveted & solid
This chainmail coif is lightweight and highly durable. Constructed from solid aluminum rings that are connected with securely riveted rings, it not only features an interesting structure but also provides exceptional stability. We offer it in three sizes, with David representing S-M, Richard for L-XL, and Berengar with XXL as the largest size. To further enhance comfort, we recommend using our padding hoods in combination with the chainmail coif.Material: Aluminium Size Chart: David (S-M) Richard (L-XL) Berengar (XXL) Head Circumference (MAX) 62 81 81 Shoulder Width 50 60 78 Pelerine Length 15 20 25 All measurements are in centimeters. Dimensions of chainmail weaves can vary significantly depending on how the product is worn.

Variantes de 99,90 €*
119,90 €*