Kendra gorget 2ND ED. brown

The leather Corsage "Kendra" is made by "Fucina del Drago".The two-part corsage is very elaborate and consists of a front and back. With two buckles each, the chest and back part are connected to each other and attached with shoulder straps.The D-rings on the front side are designed for the separately available tassets, but can also accommodate other accessories.The shaped breast fits up to cup size "D".The Corsage "Kendra" is the basis for an extraordinary women's armor. It can be ideally combined with the "Kendra" shoulders and tassets.   Material: Upper LeatherSize: UnisizeLength: 37 cmSize: 79 cm to 91 cm adjustableLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

This is the matching gorget for the leather armour series "Kendra" from the italian producer "Fucina del Drago".The detailed collar stands higher in the back, than in the front - this leaves only little view to the back, but will impress the viewers from the front.A definite add-on to the body armour from the "Kendra" series. It is attached by using the D-rings in the front and back and holds tight to the body armour then.Material: upper leatherColour: blackLength (front): 30cmWidth (front): 29cmLength (back): 30cmWidth (back): 30cm

The armour set "Kendra" is hand-crafted in Italy by Fucina del Drago. It consists of the corsage, the collar as well as the spaulders and the tassets. The curved bracers complete the set. "Kendra" was developed for female warriors and is a truly exceptional armour set. It is designed in a modular fashion, meaning you can only wear the corsage, for instance, or else only the collar and the spaulders. You can easily combine the armour parts with other spaulders or tassets and find your very own individual armour design. The measurements of the individual armour parts may be found in the respective product descriptions. Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.

A pair of spaulders from the italian leather crafter "Fucina del Drago".These are the four-piece spaulders made along the design of the "Kendra" leather armour series.The thick leather uppers is decorated with a nice detail along the edge and rounded additionally.Fits great when worn in the complete set, but can also be combined with any other armour from the "Fucina del Drago" range.Material: upper leatherMeasurements: 23cm long, 32cm wideLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr

A pair of tassets matching the "Kendra" leather series. These tassets match the "Kendra" leather corsage for ladies, which features a pair of D-rings on either side of the hip to which these tassets can be attached. The tassets consist of two parts: they take up the design of the leather bodice and continue it. Of course, the tassets can also be attached separately to an already existing armour – your imagination's the limit. Material: upper leather Dimensions: 22cm long, 20cm wide The tassets are shipped in pairs.Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.