Lucas guard set blank

49,90 €*

Tiempo de entrega 2-5 días

Número de producto: 984281
Nuestras ventajas
  • Envío gratuito a partir de 150€ (ES+)
  • Más de 25 años de experiencia
  • Elija entre más de 5.000 artículos
Información sobre el producto "Lucas guard set blank"

Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers.

A great basis for "dark" characters, but they are also suitable as a contrast for brighter costumes. The "Lucas" set of bracers and greaves was specially designed for children and adults with a really small circumference on arms and legs. They are shorter and smaller in diameter, but can "grow" with the wearer by carefully bending them open a little.

Just like all pieces from the "Lucas" range, they are built with a stiffening ridge along the edges and are being closed with two straps on each piece.

We suggest to wear padded bracers and greaves underneath to avoid scratches and bruises when playing outside. Not only does this maximise comfort, but also protects the skin and bones.

Measurements:

Lucas bracers:
Length: 20cm
Width (top): 15cm
Width (bottom): 12cm
Weight: app. 0,7kg

Lucas greaves:
Length: 25cm
Width (top): 20cm
Width (bottom): 15cm  
Weight: app: 1,1kg

Colour: blank

This set contains the bracers (blank) and the greaves (blank) from the "Lucas" series.

Los clientes también vieron

Lucas guard set browned
Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers. A great basis for "dark" characters, but they are also suitable as a contrast for brighter costumes. The "Lucas" set of bracers and greaves was specially designed for children and adults with a really small circumference on arms and legs. They are shorter and smaller in diameter, but can "grow" with the wearer by carefully bending them open a little. Just like all pieces from the "Lucas" range, they are built with a stiffening ridge along the edges and are being closed with two straps on each piece. We suggest to wear padded bracers and greaves underneath to avoid scratches and bruises when playing outside. Not only does this maximise comfort, but also protects the skin and bones. Measurements: Lucas bracers:Length: 20cm Width (top): 15cm Width (bottom): 12cmWeight: app. 0,7kg Lucas greaves: Length: 25cm Width (top): 20cm Width (bottom): 15cm  Weight: app: 1,1kg Colour: browned This set contains the bracers (browned) and the greaves (browned) from the "Lucas" series.

59,90 €*
Markward guard set blank
Steel bracers and greaves not only protect your depicted character from the attacks of your enemies, they also protect you quite real when recreational heroines and heroes on castles and forests experience their adventures. Underbrush and stones can quickly cause bruises during outdoor activities. With this set, shins and forearms are protected against it. We offer you here the ' Markward ' set consisting of the bracers and the greaves in blank. With its slender lines and the simple design it fits well with all armour wearing costume ideas. Material: Steel Dimensions of Bracers: Length: 25 cmWidth: 20 cm top, 14 cm bottomWeight. 900 g Dimensions of the greaves: Length 25 cmWidth 20 cm top, 14 cm bottomWeight: 1.8 kgs Color: Blank We always recommend to wear pads under plate armour. This increases the wearing comfort and the protective effect enormously.

44,90 €*
Tobi guard set black
Consists of: Tobi bracers blackTobi greaves black

49,90 €*
%
Lucas belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

9,52 €* 11,90 €* (ahorro del 20%)
anteriormente 11,90 €*

Clientes que también compraron

%
Adam gorget
The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar. Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm Weight: 1 kg Colour: blank, browned

27,92 €* 34,90 €* (ahorro del 20%)
anteriormente 34,90 €*
Tobi greaves
The products from our "Tobi" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The greaves are made of soft split leather and decorated with rivets. They are closed on the back with two buckle straps. Material: Split leatherLength: 25cmWidth (top): 22cmWidth (bottom): 16cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image. 

29,90 €*
%
Adam belt shield blank
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

9,52 €* 11,90 €* (ahorro del 20%)
anteriormente 11,90 €*
%
Lucas belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

9,52 €* 11,90 €* (ahorro del 20%)
anteriormente 11,90 €*
Lucas gorget
This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget. Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage. Material: 1.2mm steelColour: blank

49,90 €*