Markward belt shield

13,90 €*

Tiempo de entrega 2-5 días

Color
Número de producto: 971109
Nuestras ventajas
  • Envío gratuito a partir de 150€ (ES+)
  • Más de 25 años de experiencia
  • Elija entre más de 5.000 artículos
Información sobre el producto "Markward belt shield"

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece.

The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint.

Material: 1,2 mm steel
Length: 24 cm
Width: 18 cm
Weight: app. 350 g
Colour: blank, browned

Accessory Items

Ballistol spray
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

3,90 €*

Los clientes también vieron

Wilhelm armshield large
The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

13,90 €*
Balthasar belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned

13,90 €*
Wilhelm armshield small
The small "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 23 cm Width: 17 cm Weight: app. 0,5 kg Colours: blank, browned

12,90 €*
Solo 2 disponible
Gustav belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

11,90 €*

Clientes que también compraron

Markward gorget
The gorget of the "Markward" series is not only special because of its rather technical design, it also differs in its construction from conventional plate gorgets. By a flexibly suspended throat element, the size can be varied there. This avoids that the gorget scrubs and presses on the throat. In addition, the two-part gorget was movably joined in the neck area. This also increases the wearing comfort significantly. The gorget "Markward" is well suited for all armor wearers who value functionality and comfort. Material: steelLength: 52 cmLength front part: 21cmTotal width: 38cmWeight: 3.8 Kg

34,90 €*
Markward spaulders small
The small spaulders of the "Markward" series have a long upper arm segment, which is connected to the two-part shouldersegmenet. The deceived lamellar does not just serve the ornament, it also gives additional stability. Not only the excellent price make the small spoulders "Markward" special. Their slim cut and compact design make them ideal for the addition of lighter and heavier armour. Of course, these spaulders are compatible with all Mytholon armour gorgets. Material: 1.2 mm steel Length: 32 cm Weight 1.65 kg Colour: blank, browned

49,90 €*
Arthur padded greaves
These are the matching greaves from our "Arthur" series.The greaves are backstiched in diamond-shapes and therefore very flexible when moving. The padding-effect is not neglected, but instead maximized by a plus in material. The two buckle-straps allow an individual adjustment to the wearers bods.Material: canvas, polyesterUnisize/adjustableColours: black

29,90 €*
Solo 5 disponible
Burkhard gambeson black
The Gambeson "Burkhard" is lined with firm felt and is well suited to be worn under a plate armour. The side buckles allow for optimal adjustment and makes the gambeson fit any body shape. The arms under the armpits are free for more mobility and ventilation. "Burkhard" is an optimal basis for many costume ideas. Material: Canvas (100% cotton), felt (polyester/wool)

89,90 €*
Markward torso armour
The torso armour "Markward" is a classic cuirass and consists of a chest- and a back plate. The two parts are connected with sturdy leather straps and roll buckles. You can also adjust the size of the torso armour individually. The torso armour does not have its own suspension for spaulders. An additional gorget must be used for such an extension. With its curved lines and the decorative rivets, this cuirass is ideal for building an armor with a well-wealthy character without becoming ' ostentatious '. It is well suited for knights and officers, but also for successful adventurers and wealthy mercenaries. Material: SteelColor: shiny, burnishedWeight: approx. 3 kg

129,90 €*