Sigismund burgonet

119,90 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Número de producto: 970088

Nuestras ventajas

Envío gratuito a partir de 150€ (ES+)
Más de 25 años de experiencia
Elija entre más de 5.000 artículos

Información sobre el producto "Sigismund burgonet"

This helmet is built along the historical bouronet from the early 16th century. The head is well protected inside a round scull cap with a high riser in the centre of the spine. The face is covered by the small brim in the front and the two cheek flaps on the sides. Both flaps are punched with a floral pattern aside the ears to allow a better hearing.
The helmet has an enlongened neckpiece, so that the part between cuirass and helmet is closed as well.

The burgonet developed from the sallet in the 16th century and was, just behind the Morion, the most worn helmet in the 16th and 17th century.

Material: 1,2mm steel
Size: up to 62cm circumference
Colour: blank

We recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

3,90 €*

Detalles

Los clientes también vieron

Edward full arm guard Discontinued

Discontinued, only while stocks last The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

84,43 €* 129,90 €* (ahorro del 35%)
anteriormente 129,90 €*

Berthold sallet

This helmet shows a high, pointed scull piece with an enlongened neck protection. The part on the forehead is riveted to the helmet and provides an additional protection to the wearer. The scull part is made with a spine.The visor can be moved upwards to allow a better breathing for the wearer in between battle moments.The helmet is made with an inner inlay of foam (covered in cotton) and has a chin strap attached.The sallet is a very common helmet type for the late medieval period and was often worn in combination with gotic armourment. It was used later as well, especially by bandits and sellswords, who scavaged them off the battlefield.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

119,90 €*

Einar viking helmet

This helmet is made with a round scull cap and finished with a protector for the eyes. The cap itself is decorated with two metal bands crosswise and another along the bottom edge.The "Brillenhelmet" is mostly found with nothern people of the germanic tribes and can be used in reenacting vikings.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

79,90 €*

Lena chest plate

The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm

89,90 €*

Clientes que también compraron

Doran ring belt

European belt buckles have been dated back to the Roman Empire. Prior to the buckle the roman and germanic people used a ring, made from various materials. This shape of buckle was used until the medieval period. The "Doran" series' ring belt copies this shape of buckle. The belt is made from split leather and grades almost every costume up, as the characteristic medieval knot shows the wearer linked to this period. The belt is tightened by pulling the strap through the ring a little more, than needed and securing it right behind it. The upper end is pulled through the loop then and lead to to the bottom - simple as it sounds: this is it! The knot is tightened and stays in place now. We advice to use leather fat on a regulat basis for the caretaking of split leather. Our "Gold Quality" leather fat will certainly be the best choice. Material: split leather Length: 140 cm Width: 4 cm Colour: black, brown Weight: app. 170 g

21,90 €*

Bastian shirt light cotton

Being made from light cotton and sewn in historical patterns, the shirt "Bastian" is perfectly suitable for warm days. Wear it as the first layer on top of your skin - cotton soaks up humidity very well. The cut is wide and is therefore suitable for hot and sunny days. The collar is adorned with quillings and has a lace tying just below.The wide cut sleeves are being closed just below the wrist and add a casual style to the shirt.When worn with a simple belt and a belt bag, this shirt will service as a basic costume already. The shown belt is not included in this offer. We invite you to browse our stock to find the matching pieces for your needs.Material: 100% cottonSizeLengthChest circumferenceSleeve lengthShoulder widthS741246846M771307148L781407350XL801447553XXL831567756All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

34,90 €*

Arthur padded vest

The padded vest "Arthur" is backstitched in diamond-shape and closed by four buckle-straps in the front. The sleeves and the seam on the bottom is riveted with brass eyelets, which allows the tassets and the sleeves to be combined with the jacket.The diamond-shaped backstitching povides an extra in movability and, at the same time, keeps up the padding, which avoids bruises and scratches. The collar is backstitched in smaller diamonds: this brings more comfort to the neckarea. Material: 100% cotton, polyester SMLXLXXLXXXLChest circumference90114124128144160Waist circumference86110120124142156Hip circumference92116124134146172Lenght576466,5697070 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

69,90 €*

Gustav breastplate

All our products from the "Gustav" series combine simple design and functionality at a great price performance ratio. This series of low cost plate armour gives you the opportunity to arm yourself without spending lots of money. Its design suits many different character concepts and therefore you will be able to use it over and over again for many years. It is also great for medieval fairs and historic events.The torsoplate is composed of three inflexible pieces. The middle part with its sloping edges and the rivet decoration makes for a nice eye catcher. It is closed crosswisely with two leather straps on the back and is therefore quite variable in its size.Material: 1.2mm steelWidth: 54 cm

119,90 €*

Richard chain skirt

This chain skirt is a great add-on to any existing plate armour.Wear it to close the gap between plate cuirass and full leg guard on your thighs, in the crotch and on butt. This is the spot, where most armour has no protection and any costume lacks ideas for coverage.The mail falls from hip to app. the middle of the thigh and does not interfeare with walking, fighting or running.The chain skirt is 120cm long and has a belt of some 245cm. This way it will fit with even the biggest guys and covers the designated spot well.Material: 8mm rings (inner diameter), 4-in-1 patternColour: oil finish with brown leather / browned with black leatherLength chainmail: 120cm x 40cmBelt length: 245cm

69,90 €*