Sinold belt tongue with cross

3,89 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Número de producto: 960201

Nuestras ventajas

Envío gratuito a partir de 100€ (DE)
Envío exprés en 24h (DE)
Elija entre más de 5.000 artículos

Información sobre el producto "Sinold belt tongue with cross"

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3cm.
Pins for riveting are not included; you can find them in our range of accessories.

Material: bronze
length: 7.7cm
width: 3cm

Kunden haben sich auch angesehen

Schleswig belt set

The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings. Suitable for belts from 1 cm to 1,5 cm wide Material: brasstongue dimensions: 1,3 cm x 6, 3 cmDimensions of the buckle: 2 cm x 7 cm

3,90 €*

Solo 2 disponible

Halfson belt tongue braided

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm

1,89 €*

Novgorod belt set

The two-piece belt set "Novgorod" consists of a belt tongue and a buckle. Made of brass and cast by hand, they are inspired by Viking-Age belt decorations. Suitable for belt widths from 1 to 2cmThis fitting has no pre-drilled holes, so you can decide where you need them. Just use a small metal drill to make them for your DIY project. Material: brasstongue dimensions: 1.5cm x 4.5cmbuckle dimensions: 2.5cm x 5.5cm

3,90 €*

Kunden kauften auch

Solo 1 disponible

Hemma buckle

The double buckle "Hemma" is hand-cast from brass and is suitable for straps with a width up to 3.5cm. Material: brassWidth: 4.2cmWeight: 40g

3,90 €*

Louis belt bag small

A pretty small belt bag with elaborate hand seams and a simple loop for closing. It is especially suitable for fans of living history. The beltloops are big enough to have a wide belt passed through. The expansion gap (made from suede leather) allows the bag to grow with its filling. The leather pieces of the Mytholon series "Louis" are especially suitable for fans of living history. They are made of robust upper leather and sewn by hand. Rivets where used in none of these articles. The variation made of untreated leather can be dyed or greased at your convenience.Material: LeatherWidth: 12cmHigth: 10cmDepth: up to 10cmBelt loop: up to 5cm

39,90 €*

Solo 2 disponible

Halfson belt tongue braided

1,89 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

0,49 €*

Peary jacket wool

This jacket from our "7 Seas" series is cut short and perfectly suited for the portrayal of pirates or seamen. "Peary" is a short jacket with 7/8 sleeves and a simple, round collar. The short sleeves leave shirt sleeves or jewlery visible. Eight brass buttons give you the ability to wear this jacket opened or closed. Material: woolSize: S-XXLColours: Black & brown

19,99 €* 83,90 €* (ahorro del 76.17%)