Bernardo/Sicuro crossbow stirrup lock

5,90 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Número de producto: 961056

Nuestras ventajas

Envío gratuito a partir de 100€ (DE)
Envío exprés en 24h (L-V)
Elija entre más de 5.000 artículos

Información sobre el producto "Bernardo/Sicuro crossbow stirrup lock"

A replacement stirrup lock for the crossbows "Bernardo" and "Sicuro" from our range (not suitable for "Bernardo" double or pistol crossbow). It fixes the stirrup to the crossbow while simultaneously holding the bow in place. Just like the crossbows itself, this replacement stirrup lock is handcrafted in the Italian manufactory Fucina del Drago and is a piece of masterful craftsmanship.

Material: steel
Length: approx. 5cm
Width: approx. 1cm

Kunden haben sich auch angesehen

Bernardo / Sicuro crossbow stirrup

A replacement stirrup suitable for the "Bernardo" & "Sicuro" crossbows from our program (not fitting the double or pistol crossbow). It is attached to the crossbow with the separately available bracket lock and fixes the bow in place. Like the crossbows, it is handcrafted in the Fucina del Drago manufactory in Italy and is a testament to masterful craftsmanship.Material: steel

14,90 €*

Solo 3 disponible

Bernardo pistol crossbow

The "Bernardo" pistol crossbow is manufactured in a small factory in Italy and impresses with its careful workmanship and reliable release mechanism. The shaft is made of sturdy wood, limbs, stirrup, safety and the trigger are made of burnished steel. The safety pin blocks the trigger and should be secured before cocking to avoid accidental firing. "Bernardo" can be dismantled for transport. To do this, the safety pin on the front has to be removed; the stirrups and limbs can then be removed. The crossbow has a draw strength of about 30 pounds. Please always use them responsibly within the set of the rules of your event.Material: wood, steel, Dacron bowstringTensile strength 30 poundsLength: 46 cmWidth: 43 cmFor bolts with a shaft length of 28 cm or moreWeight: 915 gr.Disclaimer: In this category you will find ranged weapons that have been specially developed for the safe representation of combat. The bows & crossbows have a reduced shooting power compared to normal sports equipment. Note: Crossbows fall under the German Weapons Act (WaffG), but do not require a permit (see Appendix 1 & 2). Therefore they are age restricted. For other countries we ask you to inform yourself about the applicable legal situation before buying.

179,90 €*

Kunden kauften auch

Bolt flat head short noctilucent

This padded bolt is made at IDV and fits most shorter crossbows.The flat head was made for short distance shots. The fletches are night glowing – just load them up with a flashlight prior to shooting and find them easier.Material: fibreglas and padding-foamLength: 9" (23cm) + safety headHead diameter: ~ 5.5 cm Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

10,90 €*

Streets Knuckleduster

Do you prefer traditional fist fighting over the use of knives or other weapons? Are you looking for an advantage in the next tavern brawl? Then the "Streets" knuckelduster by Trollfelsen is the perfect choice. Due to its small size, the knuckleduster can be easily concealed within your costume. Whether you're a ruthless brawler or a daring adventurer, with this brass knuckles, you always have one last trump card in your hand.Disclaimer: All the items shown here are specifically designed for safe combat representation in live-action role-playing games, theatrical stages, or similar activities. The padded weapons are made of a fibreglass core completely covered in soft foam to prevent injuries.Material: Foam, Latex

12,90 €*

Wilhelm armshield large

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

13,90 €*