Halfson strap end braided

1,89 €*

Prix TTC, frais de livraison en sus

Délai de livraison 2-5 jours

Réf. produit : 960198

Nos avantages

Livraison gratuite à partir de 150€ (FR,BE+)
Plus de 25 ans d'expérience
Choisissez parmi plus de 5.000 articles

Informations sur le produit "Halfson strap end braided"

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look.
Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories.
It may be necessary to adjust the holes in the belt tongue slightly.

Material: Bronze
length 7,5 cm
width 1,5 cm

Les clients ont également vu

Eagle belt fitting brass

A round brass belt fitting with an eagle symbol on it. Material: brass

1,50 €*

Seulement 4 disponible

Sinold strap end with cross

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3 cm. Pins for riveting are not included, you can find them under the accessories. Material: Bronze length: 7,7 cm width: 3 cm

3,89 €*

Flower belt decoration large

The large belt decoration "Flower" is cast from brass and can be uses to decorate leather items of all kind. Material: brassSize: 23 mm x 23 mm

1,50 €*

Novgorod - Ensemble pour ceinture

Ensemble d'une boucle et d'un embout en métal.Convient aux ceintures de 1 à 2 cm de large.Matière : 100% laitonDimensions de l'embout : 1,5 cm x 4,5 cmdimensions de la boucle : 2,5 cm x 5,5 cm

3,90 €*

Les clients ont aussi acheté

Lisig buckle

A stable brass buckle with pin to use on a belt, armour or for other attachments. The northern decoration is especially recommended for vikings or tribals. Material: BrassLength: 4,5cmWidth: 4,5cmmax. belt width: 3cm

4,90 €*

Yrsa pendant with runes

A talisman of the Vikings, a so called "Oegishjalmr" from rustic cast brass. Diameter 3.9 cm

1,50 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

0,49 €*

Novgorod - Ensemble pour ceinture

Ensemble d'une boucle et d'un embout en métal.Convient aux ceintures de 1 à 2 cm de large.Matière : 100% laitonDimensions de l'embout : 1,5 cm x 4,5 cmdimensions de la boucle : 2,5 cm x 5,5 cm

3,90 €*