With the Anselm carving fork, you give your table a rustic look. Large, sturdy, and extraordinarily practical, it is ideal for safely carving and serving roasts. A perfect addition to your cutlery!
Material: Steel, Wood
Handle length: 12 cm
Total length: 47 cm
Discontinued, only while stocks last The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours. It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps. The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts. The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision.
Material: 1.2mm steel
Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73
All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
The "Viscardi" shirt made of lightweight cotton is a great companion, whether as outerwear in summer or as an undergarment in winter. It is elaborately decorated with damask & woven clasps on the chest and yarn-woven lace trim on the sleeves. It fastens at the chest with metal buttons and can be adjusted to be worn either casually open or high-necked. With its high-quality embellishments, it is particularly suitable for portraying noble characters who enjoy a higher social status.Black is enough colour? Our "Gothic" range is aimed at all dark souls, whether in the Middle Ages, fantasy worlds or modern times. It is characterised by high-quality embellishments such as fine damask & yarn-woven lace and the integration of more modern features such as high-waist and eye-catching lacing that flatter the eye. It is particularly suitable for portraying more elegant characters and will also make you stand out from the crowd in everyday life!
Material: cotton, damask (75% polyester, 25% cotton), lace
M
L
XL
XXL
3XL
Chest Circ.
111
119
128
136
145
Hip Circ.
115
123
132
140
149
Shoulder width
44
46
48
50
50
Sleeve length w/o Lace
63,564
64,5
65
65
Length
77,5
78,580,5
81,5
83,5
All measurements are in cm. Our products are handmade, so dimensions and colours may vary slightly.
Limited edition, only while stocks last.The tunic was wide-spread within
Europe from the antiquity up to the late medieval period. It was worn by men
and women in various patterns and in all social classes. Tunics are found in
today's T-Shirt and have influenced our culture like no other piece of clothing
has. The "Lenora" ladies' tunic is made from durable linen and a perfect
underdress for many costumes. Whether you wear it underneath a dress, a bodice
or a gambeson ‒ it absorbs moisture, but will stay permeable to air. The tunic
can also be worn as a costume itself on hot summer days. Combined with a
ladies' belt, it is a light, but robust alternative to more tight-fitting
undergarments.
Those who are driven out of bed at night as the plots of a live roleplay event
demands it or who wish to go to the washing facilities in their costume in the
morning can easily use this tunic as a nightgown on events. Our
"Lenora" ladies' tunic is a simple, yet multi-purpose functional
piece of clothing.
Material: herringbone (30% polyester, 30% acrylic, 21% wool, 13% cotton, 6% viscose)
Il coltello da cucina "Anselm" è l'accessorio ideale tra le posate e cucine medievali. È realizzato in acciaio, molto grezzo e resistente. Materiali: acciaio e legno Lunghezza: 23 cm Larghezza: 2,5 cm
The "Gilli" hat made from our robust canvas is modelled on round caps from historical finds from the Viking Age. The hem is decorated with fine herringbone pattern and emphasises the Nordic character of the hat. "Gilli" is fastened at the back with our "Tasso" buckle and can be easily adjusted for an ideal fit. The "Gilli" hat is particularly suitable for depicting characters from Nordic climes such as Vikings, shield maidens, travelling merchants, wanderers and much more. As characteristic headgear, however, it can also harmoniously round off many other garments both on and off the battlefield.
Our "Northwind" series is dedicated to the Vikings, the Rus and
other Northeners whose journeys were made possible by the north
wind. "Northwind" is characterised by high-quality materials such
as our herringbone and elaborate embroidery. This series can be
used for many different character concepts of the North, be it in
LARP or simply for the next medieval market.
Material: 100% cottonS/ML/XLXXL/3XLHem circumference54 - 5758 - 6162 - 64
All measurements are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.
The shoulder bags of the Belwar series are made of robust cowhide leather and are closed with two hand-forged iron buckles. These bags are suitable for all costumes and purposes. The shoulder bag is ideal for carrying larger items such as books, scrolls and large potions. Material: upper leather Size: 30 cm x 27 cm
The "Gilli" hat made from our robust canvas is modelled on round caps from historical finds from the Viking Age. The hem is decorated with fine herringbone pattern and emphasises the Nordic character of the hat. "Gilli" is fastened at the back with our "Tasso" buckle and can be easily adjusted for an ideal fit. The "Gilli" hat is particularly suitable for depicting characters from Nordic climes such as Vikings, shield maidens, travelling merchants, wanderers and much more. As characteristic headgear, however, it can also harmoniously round off many other garments both on and off the battlefield.
Our "Northwind" series is dedicated to the Vikings, the Rus and
other Northeners whose journeys were made possible by the north
wind. "Northwind" is characterised by high-quality materials such
as our herringbone and elaborate embroidery. This series can be
used for many different character concepts of the North, be it in
LARP or simply for the next medieval market.
Material: 100% cottonS/ML/XLXXL/3XLHem circumference54 - 5758 - 6162 - 64
All measurements are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.
The "Connor" chain bracers are inspired by historical finds and offer the protection of chain mail in combination with the comfortable wearing of leather bracers. They are closed at the back with 2 leather straps & buckles. The chain mesh is sewn all around with the bracers and edged with suede. We recommend combining them with padded bracers or arm wraps to protect against bruises and abrasions.In this variant, the chain mesh is burnished to protect against rust. This also makes it good for clandestine or dark characters.Material: leather, steelDimensions: 28 cm x 24 cmLeather
is a product of nature and may take dyes differently. The actual hue
may differ from the image.
49,90 €*
Oltre 25 anni di esperienza
Scelta tra oltre 5.000 articoli
Spedizione gratuita da 150€ (IT+)
Spedizione veloce, anche all'estero
Questo sito web utilizza i cookie per assicurare la miglior esperienza possibile. Ulteriori informazioni...