Borre belt fitting ring

9,90 €*

Prezzi incl. IVA più costi di spedizione

Tempi di consegna 2-5 giorni

Codice prodotto: 960322

I nostri vantaggi

Spedizione gratuita a partire da 100€ (DE)
Spedizione espressa entro 24 ore (Mo-Fr)
Scegli tra più di 5.000 articoli

Info sui prodotti "Borre belt fitting ring"

The belt fitting ring "Borre" is a well done replica, made after a historical find from Gotland dated to the 10th century. Belt distributors or fitting rings were very widespread in the time of the Vikings and can be found in the area of the Rus as well as on Gotland and in all other settlement areas the Vikings. They were used for sword sheaths and made sure that the sword or sax always hung on the belt at the optimum angle.

Material: Zamak
Diameter 3.5 cm

Kunden haben sich auch angesehen

Bird of prey brooch

A bronze-coloured brooch in the shape of a bird of prey. Material: bronze Length: 4cm Width: 2cm

9,90 €*

Copertura per scudo da bambino Felix blu/crema

Queste coperture permettono di cambiare ogni volta l’aspetto del tuo scudo. Cambia personaggio ogni volta che vuoi. Personalizza con le diverse toppe del nostro catalogo.Le coperture sono realizzate in canvas molto resistente per proteggere lo scudo in modo ottimale. Materiale: canvasMisure: si adatta perfettamente all scudo Felix

19,90 €*

Copertura per scudo da bambino Felix nero/verde

19,90 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!

0,49 €*

Kunden kauften auch

Louis belt bag small

A pretty small belt bag with elaborate hand seams and a simple loop for closing. It is especially suitable for fans of living history. The beltloops are big enough to have a wide belt passed through. The expansion gap (made from suede leather) allows the bag to grow with its filling. The leather pieces of the Mytholon series "Louis" are especially suitable for fans of living history. They are made of robust upper leather and sewn by hand. Rivets where used in none of these articles. The variation made of untreated leather can be dyed or greased at your convenience.Material: LeatherWidth: 12cmHigth: 10cmDepth: up to 10cmBelt loop: up to 5cm

39,90 €*

Suggerimento

Bruna water bottle

The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET Capacity: 1.5 litres Length: 25 cm Width: 8 cm Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

49,90 €*

Kassandra blouse sailcloth

The Kassandra blouse stands out for its placket of cast metal buttons. This gives it, despite an airy cut and the wide trumpet sleeves, a strict, almost uniform character. This makes Kassandra ideal for all costumes that need to look a little more official. However, if you combine it with a skirt and bodice, it quickly gets a noble, feminine look. Asian costumes, pirates, nobility or elf costumes can also be realized with this versatile blouse.Material: 100% CottonSizechart: S M L XL XXL Chest circumference 93 101 110 122 135 Waist circumference 79 87 96 109 123 Hip circumference 105 111 118 128 139 Sleeve lenght 60 60,5 61 61,5 62 Lenght 69,5 70,5 71,5 72,5 73,5 All figures are in cm. Our products are handmade, dimensions and colours tones may therefore differ slightly.

59,90 €*

Mantello Tilly, canvas

Capo d’abbigliamento indispensabile se si vuole interpretare un personaggio spadaccino del XVII secolo, come un moschettiere o un qualsiasi combattente con un stocco. Si indossa su una spalla, si chiude con due lacci sotto la spalla opposta ed è caratterizzato da una doppia mantellina. Realizzato in resistente canvas, repellente alla pioggerella leggera.Materiale: 100% canvas di cotoneColori: nero, marrone, rosso, bordeauxLunghezza: 90 cm circaLarghezza: 240 circa cm

49,90 €*