Novgorod belt set

3,90 €*

Prezzi incl. IVA più costi di spedizione

Tempi di consegna 2-5 giorni

Codice prodotto: 960196

I nostri vantaggi

Spedizione gratuita a partire da 100€ (DE)
Spedizione espressa entro 24 ore (Mo-Fr)
Scegli tra più di 5.000 articoli

Info sui prodotti "Novgorod belt set"

The two-piece belt set "Novgorod" consists of a belt tongue and a buckle. Made of brass and cast by hand, they are inspired by Viking-Age belt decorations.

Suitable for belt widths from 1 to 2cm

This fitting has no pre-drilled holes, so you can decide where you need them. Just use a small metal drill to make them for your DIY project.

Material: brass
tongue dimensions: 1.5cm x 4.5cm
buckle dimensions: 2.5cm x 5.5cm

Kunden haben sich auch angesehen

Sinold strap end with cross

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3 cm. Pins for riveting are not included, you can find them under the accessories. Material: Bronze length: 7,7 cm width: 3 cm

3,89 €*

Schleswig belt set

The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings. Suitable for belts from 1 cm to 1,5 cm wide Material: brasstongue dimensions: 1,3 cm x 6, 3 cmDimensions of the buckle: 2 cm x 7 cm

3,90 €*

Cintura Mattis

Una cinta ricavata da un pezzo unico di cuoio spesso. Decorata con cinque fiori, fibbia e puntale in ottone. Adatta per fermare gli abiti. Sulla punta è rappresentata una croce sotto una corona.Materiale: pelle, ottone.Lunghezza: 157cmPuntale: 7cmAltezza: 2cm

39,90 €*

Cintura Sophia

Un cintura da donna ispirata ad un modello realmente esistito storicamente. Prodotta in cuoio e decorata con fibbia, puntale e applicazioni a forma di rosa che la rendono accattivante.Materiale: pelle e ottone.Lunghezza: 130cmPuntale: 10cmAltezza: 2cm

44,90 €*

Kunden kauften auch

Halfson strap end braided

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm

1,89 €*

Coltello Darius

Coltello realizzato in schiuma molto resistente, concepito come robusto coltello da combattimento. Si adatta a vari personaggi, non è un giocattolo ma si usa per il gioco di ruolo dal vivo.Materiale: schiumaLunghezza totale: 29 cmLunghezza lama: 20 cmDICHIARAZIONE DI ESCLUSIONE RESPONSABILITA’: Tutti gli oggetti mostrati sono stati progettati per simulare combattimenti sicuri in ambienti controllati. Arma realizzata interamente in schiuma.

14,90 €*

Fibbia Lisig

Fibbia in ottone con perno da utilizzare per personalizzare la propria cintura o la propria armatura. Decorazione nordica è particolarmente adatta a personaggi vichinghi.Materiale: ottoneLunghezza: 4,5 cmLarghezza: 4,5 cmLarghezza passo: 3 cm

4,90 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!

0,49 €*