Vigor bevor

63,91 €*

% 79,90 €* (20.01% risparmio) precedentemente 79,90 €*

Prezzi incl. IVA più costi di spedizione

Tempi di consegna 2-5 giorni

Codice prodotto: 961714

I nostri vantaggi

Spedizione gratuita a partire da 150€ (IT+)
Oltre 25 anni di esperienza
Scegli tra più di 5.000 articoli

Info sui prodotti "Vigor bevor"

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.

The bevor contributes a lot to the armour set’s brute look, and it is easy to adorn with wax seals or to blazon it with your coat of arms. It consists of two interlaced moving segments; the interior front segment slants way down and rests against the torso, ensuring that neither your vision nor your breathing are impaired. The outer neck segment rests on the spaulders and is broad enough to offer full mobility for your head.

It goes without saying that all edges of these armour pieces are beaded.

Material: steel, leather

Bevor:
Front segment height: 20.5cm
Neck segment height: 18cm
Side height: 8cm
Length (front to neck) 37cm
Width (inner) front segment: 23cm
Width (outer) neck segment: 28.5cm
Weight: 1.6kg

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.
Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

I clienti hanno visto anche

Solo 1 disponibile

Vigor tassets with belt

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The armour belt is long enough even for broader hips and features three tassets. These are suspended from the belt from loops so that their position can be adjusted individually. In order to reduce the armour belt’s size, you can remove the central tasset and thus shorten the belt’s circumference.It goes without saying that all edges of these armour pieces are beaded. Material: steel, leatherArmour belt: Length: approx. 160cm Width approx. 2.8cm Side tassets: Width (top): 47cm Width (bottom): 24cm Length: 36cm Weight (each): approx. 1.8kg Central tasset: Width (top): 36cm Width (bottom): 13cm Length: 34.5cm Weight: approx. 1.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

119,93 €* 149,90 €* (19.99% risparmio)
precedentemente 149,90 €*

Vigor spaulders

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The mighty spaulders consist of seven segments and also feature segmented upper arm protection. All the parts are connected flexibly and allow a maximum in freedom of movement.It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

127,93 €* 159,90 €* (19.99% risparmio)
precedentemente 159,90 €*

Mortimer bevor

The "Mortimer" bevor fits perfectly to the cuirass of the same name. The high half collar has a mobile visor and protects the neck, as well as the lower part of the face. Together with a helmet, such as our "Götz" Schaller, you get optimal protection for the whole head. The bevor is fastened with a belt in the neck. Together with the cuirass "Mortimer" and one of our Sallet helmets you get an armour, that fits well for costumes from the 15th century. Of course the bevor can also be combined with other armour. Additional spaulders cannot be attached. Material: steel 18 gauge (1,27 mm)Dimensions: Width: 30 cmWidth neckline: 17 cm

39,91 €* 49,90 €* (20.02% risparmio)
precedentemente 49,90 €*

Solo 4 disponibile

Vigor torso armour

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric. At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather Torso: Chest width: 67cm Length (shoulders to lower segment): 55cm Width neck cutout: 18cm Weight: approx. 5.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

199,92 €* 249,90 €* (20% risparmio)
precedentemente 249,90 €*

I clienti hanno acquistato anche

Solo 4 disponibile

Vigor torso armour

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric. At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather Torso: Chest width: 67cm Length (shoulders to lower segment): 55cm Width neck cutout: 18cm Weight: approx. 5.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

199,92 €* 249,90 €* (20% risparmio)
precedentemente 249,90 €*

Fibula Hilde

Piccola fibula in bronzo che va ad ampliare la nostra vasta gamma di fibule. É decorativa e funzionale, può essere per esempio usata per fermare le fasce sul polpaccio o sulle braccai.Materiale: bronzoLunghezza: 2,8 cmLarghezza: 3,2 cmLunghezza spillo: 4 cm

6,50 €*

Louis beltbag + Mytholon Patch

Special Set for Easter 2024

40,90 €*

Vigor spaulders

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The mighty spaulders consist of seven segments and also feature segmented upper arm protection. All the parts are connected flexibly and allow a maximum in freedom of movement.It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

127,93 €* 159,90 €* (19.99% risparmio)
precedentemente 159,90 €*