Bernardo crossbow bolt

5,90 €*

Articolo attualmente non disponibile - In produzione

Avvisami quando il prodotto è di nuovo disponibile.
Codice prodotto: 961051
I nostri vantaggi
  • Spedizione gratuita a partire da 100€ (DE)
  • Spedizione espressa entro 24 ore (DE)
  • Scegli tra più di 5.000 articoli
Info sui prodotti "Bernardo crossbow bolt"

The "Bernrado" bolt fits perfectly on our "Bernardo" crossbow. A stable wooden shaft and "fletches" made of robust leather not only look good, they also ensure a long service life. The safety head is made of soft PU foam and meets the usual safety standards for live role-playing games.

If the bolt is a little too loose or too tight on the "Bernardo" crossbow, we recommend to exchange the retaining clip for the other size or to adjust it by carefully bending it. The clips are handmade and may vary slightly in their curvature.
Material: wood, leather, PU foam

shaft length: 28 cm
head length: 8,5 cm

Disclaimer: In this category you will find ranged weapons that have been specially developed for the safe display of battles. The Arrows & Bolts have foam safety heads with pressure distributors to prevent injury. They are intended to be used with ranged weapons with reduced firepower developed for Larp.

Accessory Items

Bernardo crossbow
The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds length: 85 cm width: 62 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.

199,90 €*
Arnulf bolt quiver canvas black
The quiver "Arnulf" does not only hold lots of bolts, but can also be tied up while running so you can keep a secret reserve of bolts. The quiver holds up to 10 bolts.Material: canvas, upper leatherDiameter: approx. 16 cm, heigth: 29 cm/39 cm when laced up

49,90 €*
Arnulf bolt quiver suede
The quiver "Arnulf" does not only hold lots of bolts, but can also be tied up while running so you can keep a secret reserve of bolts. The quiver holds up to 10 bolts.Colour: brown/blackMaterial: suede, upper leatherDiameter: approx. 16 cm, heigth: 29 cm/39 cm when laced up

79,90 €*

Accessory Items

Solo 2 disponibile
Dardo da balestra IDV 15"
Questi morbidi dardi sono prodotti per le balestre IDV/Eysenkleider. la testa tonda è adeguata a tiri lunghi, quella piatta per tiri corti, più tesi.Le piume sono fluorescenti – caricatele con la luce prima di tirare per poterle poi trovare più facilmente. Lunghezza: 15'' (39cm)/da testa a incocco = 35cm/14''Materiale: fibra di vetro, plastazote

10,90 €*
Solo 1 disponibile
Bolt flat head long noctilucent
This padded bolt is made at IDV and fits most large crossbows.The flat head was made for short distance shots. The fletches are night glowing – just load them up with a flashlight prior to shooting and find them easier.Material: fibreglas and padding-foamLength: 14" (35cm) + safety headHead diameter: ~ 5.5 cm Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc..  All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

11,90 €*
Bolt round head long black
Attention:This bolt only works with the large Eysenkleider crossbows. The bolt is too long for the pistol crossbow.This crossbow bolt is made for most crossbows available.The round head is thought for long distances.Material: Fibreglas and padding foamLength: 15 Inches (35,5cm) + 8cm safety head Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc..  All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

10,90 €*
Solo 1 disponibile
Bolt flat head long black
This padded bolt is made at IDV and fits most large crossbows.The flat head was made for short distance shots. The fletches are night glowing – just load them up with a flashlight prior to shooting and find them easier. Material: fibreglas and padding-foamLength: 14" (35cm) + safety headHead diameter: ~ 5.5 cm Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

11,90 €*

Kunden haben sich auch angesehen

Bernardo crossbow
The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds length: 85 cm width: 62 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.

199,90 €*
Balestra pistola Bernardo
La balestra a pistola "Bernardo" è prodotta artigianalmente in Italia. Dettagli di pregio e meccanismo super efficiente e sicuro. Il teniere è in legno massello, flettenti, staffa, sicura e grilletto sono in acciaio con finitura brunita. La sicura blocca il grilletto deve essere inserita prima di armare per evitare uno sparo accidentale. La balestra “Bernardo" può essere facilmente smontata per il trasporto. Per fare ciò è necessario rimuovere il perno di sicurezza sul frontale; la staffa e l’arco possono quindi essere rimossi. La balestra ha una forza di trazione di circa 30 libbre. Si prega di usarli sempre responsabilmente all'interno delle regole del vostro evento.Materiale: legno, acciaio, corda dell'arco DacronResistenza alla trazione 30 libbreLunghezza: 46 cmLarghezza: 43 cmPer dardi con una lunghezza del teniere di 28 cm o piùPeso: 915gr.Dichiarazione di non responsabilità: in questa categoria troverai armi a distanza che sono state sviluppate appositamente per la rappresentazione sicura del combattimento. Gli archi e le balestre hanno una potenza di tiro ridotta rispetto alle normali attrezzature sportive. Nota: le balestre rientrano nella legge italiana tra le armi, ma non richiedono un permesso. Pertanto sono soggetti a limiti di età (l’acquisto può essere effettuato soltanto da persone maggiorenni).

179,90 €*
Balestra doppia Bernardo
La balestra doppia "Bernardo" è prodotta artigianalmente in Italia. Dettagli di pregio e meccanismo super efficiente e sicuro. Il teniere è in legno massello, flettenti, staffa, sicura e grilletto sono in acciaio con finitura brunita. La sicura blocca il grilletto deve essere inserita prima di armare per evitare uno sparo accidentale. La balestra “Bernardo" può essere facilmente smontata per il trasporto. Per fare ciò è necessario rimuovere il perno di sicurezza sul frontale; la staffa e l’arco possono quindi essere rimossi. La balestra ha una forza di trazione di circa 30 libbre. Si prega di usarli sempre responsabilmente all'interno delle regole del vostro evento.Materiale: legno, acciaio, corda dell'arco in Dacron Resistenza alla trazione 30 libbreLunghezza: 96 cmLarghezza: 63 cmPer dardi con una lunghezza del teniere di 28 cm o piùPeso: 2,5 kgDichiarazione di non responsabilità: in questa categoria troverai armi a distanza che sono state sviluppate appositamente per la rappresentazione sicura del combattimento. Gli archi e le balestre hanno una potenza di tiro ridotta rispetto alle normali attrezzature sportive. Nota: le balestre rientrano nella legge italiana tra le armi, ma non richiedono un permesso. Pertanto sono soggetti a limiti di età (l’acquisto può essere effettuato soltanto da persone maggiorenni).

319,90 €*

Kunden kauften auch

Bernardo crossbow
The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds length: 85 cm width: 62 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.

199,90 €*
Gebhard bolt quiver
The bolt quiver "Gebhard" is sewn from robust leather and is worn with a strap over the shoulder. It holds up to six bolts, depending on their design. Its carrying strap is closed with a hand-forged iron buckle. Of course, the belt can also be used to wear "Gebhard" as a hip quiver.Height: 36 cm Top width: 14 cm Bottom width: 12 cm Belt length: 150 cmOur products are handmade, dimensions and colours tones may therefore differ slightly.

49,90 €*