Halfson belt tongue braided

1,89 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Número de producto: 960198

Nuestras ventajas

Envío gratuito a partir de 150€ (ES+)
Más de 25 años de experiencia
Elija entre más de 5.000 artículos

Información sobre el producto "Halfson belt tongue braided"

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look.
Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories.
It may be necessary to adjust the holes in the belt tongue slightly.

Material: Bronze
length 7,5 cm
width 1,5 cm

Los clientes también vieron

Novgorod belt set

The two-piece belt set "Novgorod" consists of a belt tongue and a buckle. Made of brass and cast by hand, they are inspired by Viking-Age belt decorations. Suitable for belt widths from 1 to 2cmThis fitting has no pre-drilled holes, so you can decide where you need them. Just use a small metal drill to make them for your DIY project. Material: brasstongue dimensions: 1.5cm x 4.5cmbuckle dimensions: 2.5cm x 5.5cm

3,90 €*

Clientes que también compraron

Yrsa pendant with runes

A rustic talisman of the Vikings, a so called "Oegishjalmr" from rustic cast brass. Diameter 3.9 cm

1,50 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

0,49 €*

Novgorod belt set

3,90 €*

Lisig buckle

A stable brass buckle with pin to use on a belt, armour or for other attachments. The northern decoration is especially recommended for vikings or tribals. Material: BrassLength: 4,5cmWidth: 4,5cmmax. belt width: 3cm

4,90 €*

Doran belt slim

A simple leather belt. Fits most character classes. It is closed with a buckle. The belt is made from riveted leather parts.Length: 123cmWidth: 2,2cmColour: black, brown

9,90 €*