Henry belt

59,90 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Color

Número de producto: 986983

Nuestras ventajas

Envío gratuito a partir de 150€ (ES+)
Más de 25 años de experiencia
Elija entre más de 5.000 artículos

Información sobre el producto "Henry belt"

The belt "Henry" is made from tough upper leather and has some brass applications fit to it.
The belttip and the buckle make this belt a true eyecatcher.

Material: upper leather, brass
Length: 130cm
Width: 2,3cm
Colour: black, brown

Los clientes también vieron

William quiver canvas

The quiver "William" holds arrows "in tufts". Not only does it look good and has a good handling to it, but can also be closed with an attached string, so your arrows do not fall out while running. The quiver is equipped with two shoulder straps, so you can carry it like a backpack. there is four more straps (with buckles), which make it passible to compress the empty bag or to stow away your bow. It holds up to 50 (!) arrows for excessive usage.Materials: Canvas and LeatherColours: black, brownDiameter: 25cm, Heigth: 60cm

59,90 €*

Richard chain collar

This chain collar is a great finish for all costumes, where the spectator should see a closed chainmail on the collar and your neck being covered with a nice finish.The 8mm rings are woven in the classic european 4-in-1 pattern and are sewn onto a piece of soft brown suede.The two buckle straps in the back allow an individual adjustment to the wearers neck. Adjustable from 37cm to 48cm.A great protection from assassins' visits at night and a worthy finish for most costumes.Material: 8mm chain rings and suedeColour: oil finished rings and brown suede / browned rings and black suede

Variantes de 19,90 €*

24,89 €*

Gudrun pot-stand

A small pot stand.The three twisted feet allow this stand to be put up right above a fire or ambers to use it instead of a tripod. This minimizes the necessaries you need in your camp.Our small pot fits just perfect into the stand.Material: steelSmall: 20cm legs heigth; 22,5cm length on each sideLarge: 20cm legs heigth; 38cm length on each side

Variantes de 24,89 €*

34,90 €*

Richard chain skirt

This chain skirt is a great add-on to any existing plate armour.Wear it to close the gap between plate cuirass and full leg guard on your thighs, in the crotch and on butt. This is the spot, where most armour has no protection and any costume lacks ideas for coverage.The mail falls from hip to app. the middle of the thigh and does not interfeare with walking, fighting or running.The chain skirt is 120cm long and has a belt of some 245cm. This way it will fit with even the biggest guys and covers the designated spot well.Material: 8mm rings (inner diameter), 4-in-1 patternColour: oil finish with brown leather / browned with black leatherLength chainmail: 120cm x 40cmBelt length: 245cm

Variantes de 69,90 €*

79,90 €*

Clientes que también compraron

Borg bracers

Our "Borg" bracers are made from high quality leather. Simple, but well fabricated, they round off many cosumes.They look great as a finish for your shirt sleeves and are closed by tieing them together.Material: upper leatherMeasurements: 23cm length, 14cm on top, 16cm on the bottomSold in pairs.Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.

34,90 €*

Recomendación

Bruna water bottle

The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET Capacity: 1.5 litres Length: 25 cm Width: 8 cm Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

49,90 €*

Richard chain collar

19,90 €*

Orthello suede vest brown

The vest "Orthello" is made of soft suede. It is closed on the front side with roller buckles. These can also be used to individually adjust the vest to the wearer's size. To improve mobility, it is slitted on the back. "Orthello" is a wind-proof and robust upper garment that offers many combination possibilities. It may be complemented with hoods and collars and wears well under a leather armour or over a chainmail shirt. Many cosume ideas can be realized using this vest as a basis. Material: 100 % LeatherSizeLengthChest circumferenceS78100M80110L82120XL84130XXL86134All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly.Leather is a product of nature and may take dyes differently. The actual hue may differ from the image. Photographic images and screen settings may not accurately represent colour tones.

79,90 €*

Solo 5 disponible

Balthasar belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned

13,90 €*