Konrad kettle helmet

Discontinued, only while stocks last   The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

This fibula is a nice accessory for any kind of costume. And it\\'s available for a very reasonable price. The thorne is pushed through the fabric and then closed by rotating the fibulas\\' arms.The endings are flattened and by that somewhat adornable.Measurements: Thorn app. 10cmDiameter: app. 8cmThe sizes of each single fibula may vary due to the manual production of this item.You may want to take a look at our other fibulas.

10 copper clarp coins for a set price

The collar "Arthur" matches the entire series.It is backstitched in diamond-shape and adjustes to the wearers body very comfortably. The upper part is backstitched in smaller shapes, which brings a plus in movability around the neck.The collar is closed with a single buckle-strap in the front.Material: Canvas, PolyesterUnisize/adjustableColours: brown and black

The "Hilde" fibula made from bronze adds a smaller decorative fibula to our line of products by demand. It can for example be used to fix our arm wraps or puttees. Material: BronzeLength: 2,8cmWidth: 3,2cmLength of thorn: 4cm

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g