Korbin belt badge red/cream

4,90 €*

Prezzi incl. IVA più costi di spedizione

Tempi di consegna 2-5 giorni

Colore

rosso/naturale

Variazione

Incastro

Scudo

Tridente

Codice prodotto: 960250

I nostri vantaggi

Spedizione gratuita a partire da 100€ (DE)
Spedizione espressa entro 24 ore (DE)
Scegli tra più di 5.000 articoli

Info sui prodotti "Korbin belt badge red/cream"

The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.

Material: cotton
Length: 35 cm
Width: 12.5 cm

Kunden haben sich auch angesehen

Korbin belt badge green/cream

The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints. Material: cottonLength: 35 cmWidth: 12.5 cm

4,90 €*

Korbin belt badge green/black

4,90 €*

Kunden kauften auch

Korbin belt badge red/cream

4,90 €*

Solo 4 disponibile

Korbin belt badge red/cream

4,90 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!

0,49 €*

Arthur gambeson lungo

Questo gambeson trapuntato è un accessorio ideale per essere indossato sotto vari tipi di armature. Le maniche relative alla nostra serie “Arthur” possono essere aggiunte separatamente.

109,90 €*