Dragomir armour set burnished large

474,95 €*

% 949,91 €* (ahorro del 50%)

Artículo actualmente agotado - En producción

Avísenme cuando el producto vuelva a estar disponible.
Número de producto: 961924
Nuestras ventajas
  • Envío gratuito a partir de 100€ (DE)
  • Envío exprés en 24h (DE)
  • Elija entre más de 5.000 artículos
Información sobre el producto "Dragomir armour set burnished large"

The plate armour "Dragomir" is an incredibly complex suit of armour. It consists of several overlapping, moving segments and finely wrought elements that interact to form an extraordinary armour set.

All Dragomir armour pieces are carefully crimped, beaded and coordinated to complement one another. They stand out through their shape and the masterful finish that make this armour suit so unique.
If you prefer a little less embellishment and want to save some money, we recommend you have a look at Dragomir's brother, Rikomer. Although technically identical, Rikomer dispenses with the decorative beads in favour of a more brute look and a lower price.
Armour suits like this are normally only available as custom-made pieces, and we had to fiddle with it for a long time before we could bring it to serial production. Of course, the fit can (and will have to) be optimized here and there by carefully bending the pieces, but we have designed the armour so that it can be worn to battle with maximum wearing comfort. The large size has a bigger torso and armour belt. All pieces are burnished for protection from rust, this makes Dragomir a great match for dark knights or champions of chaos.

We generally recommend wearing a gambeson and padded bracers & greaves underneath plate armour; wearing comfort and protective effect are significantly improved.

Material: steel, leather

Kunden haben sich auch angesehen

Solo 4 disponible
Fafnir brigandine set browned
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment.You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors.The complete set of our "Fafnir" line of products, consisting of: Fafnir bracers brownedFafnir greaves brownedFafnir brigandine browned Material: Steel, suede, leather, Cottoncanvas

579,90 €*
Fafnir brigandine set blank
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment.You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors.The complete set of our "Fafnir" line of products, consisting of: Fafnir bracers blankFafnir greaves blankFafnir brigandine blank Material: Steel, suede, leather, cottoncanvas

549,90 €*

Kunden kauften auch

Solo 2 disponible
Halfson belt tongue braided
Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm

1,89 €*
Sombrero de fieltro de ala ancha marrón
Este sombrero tiene forma circular y está equipado con un ala ancha, lo que lo convierte en la base perfecta para una amplia variedad de personajes.Hecho de fieltro de lana 100% puro y una diadema interior de poliéster, este sombrero se puede usar de muchas maneras: ya sea como su sombrero de ala ancha habitual o como bicornio, tricornio o sou'wester, simplemente doble el ala hacia el forma requerida para su personaje.Material: fieltro de lanaTallas: de 54 a 60Recomendamos combinarlo con una cofia.La fábrica de ropa italiana "Narsilion" combina la artesanía tradicional y los cortes históricos con materias primas de alta calidad.

39,90 €*

Zuletzt angesehen

Solo 1 disponible
Stannis historical bardiche
Many view the bardiche as the successor of the Dane axe. It was in use from the 14th century on, but evidences may also be found in manuscripts from as early as the 12th century.  The "Stannis" bardiche is a foam weapon that is based on this type of commonly used polearm. Its long, curved blade is connected to the simple wooden handle in three places. Robust leather inlays provide the necessary rigidity. Notches and score marks as well as an imitated wooden grain give "Stannis" a very realistic optic. A long hilt wrapped in suede provides good grip. This polearm can be divided into two parts! This allows for easy transport and space-saving storage. Screwed together by means of a robust metal thread, it does not lack stability when in use. Of course, the "Black Dragon" polearms may also be mixed and matched in this way. Please do not touch the exposed end of the upper glass fibre reinforced plastic rod bare-handed as there may be splinters. In the "Black Dragon" series, Italian manufactory Fucina del Drago, famous for their exceptional leather products, have created a foam weapon brand that combines traditional craftsmanship with a fantastic design. The "Black Dragon" foam weapons are 100% handcrafted in Italy. They feature an outer coat of latex varnished with a layer of protective lacquer. Inserts of robust leather guarantee the necessary stability and durability. Carefully painted and with boasting a high-quality leather hilt wrapping, the "Black Dragon" foam weapon range will be a trusty companion for a long time. Please note that each foam weapon is individually crafted by hand, which is why the individual weapons' shape and colour may deviate slightly from the image. We recommend regular care with silicone oil. Keep your foam weapons clean and dry at all times. Do not store them in a weapon's holder or similar contraption for extended periods of time. Your foam weapon should not be exposed to a lot of heat or direct sunlight for extended periods of time. This could lead to deformations or damage to the surface. Material: foam, glass fibre reinforced plastic, latex, leather Length: 220cm Axe head width: 21cm Axe head length: 74cm Handle length: 113cm Weight: approx. 1.7kg Disclaimer: All items shown here were specially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons consist of a glass fibre reinforced plastic rod as the core, fully encapsulated in soft foam to avoid injuries.

219,90 €*