Berthold sallet

€119.90*

Delivery time 2-5 days

Product number: 970089
Our benefits
  • Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
  • Great Quality for low prices
  • Choose from 5.000+ items
Product information "Berthold sallet"

This helmet shows a high, pointed scull piece with an enlongened neck protection. The part on the forehead is riveted to the helmet and provides an additional protection to the wearer.
The scull part is made with a spine.
The visor can be moved upwards to allow a better breathing for the wearer in between battle moments.

The helmet is made with an inner inlay of foam (covered in cotton) and has a chin strap attached.

The sallet is a very common helmet type for the late medieval period and was often worn in combination with gotic armourment. It was used later as well, especially by bandits and sellswords, who scavaged them off the battlefield.

Material: 1,2mm steel
Size: up to 62cm circumference
Colour: blank

We recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

Accessory Items

Ballistol spray
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

€3.90*

Customers also viewed

%
Edward full arm guard Discontinued
Discontinued, only while stocks last   The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€64.95* €129.90* (50% saved)
Goetz sallet
The sallet is considered as a development of the iron hat and was the most common helmet of the 15th century in Europe. It was available in various versions: sometimes with no visors, often with flexible necks, but often with stiff neck protection. The salletr "Götz" has a rigid neck protector and a movable visor. A high, pronounced crest adorns the helmet and gives it stability. The front section is additionally reinforced. The helmet is provided with a foam lining and is closed with a sturdy chin strap. Material: 1, 2mm steelColor: BlankSize: Fits up to hatsize 61 

€99.90*
Einar viking helmet
This helmet is made with a round scull cap and finished with a protector for the eyes. The cap itself is decorated with two metal bands crosswise and another along the bottom edge.The "Brillenhelmet" is mostly found with nothern people of the germanic tribes and can be used in reenacting vikings.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€79.90*
Sigismund burgonet
This helmet is built along the historical bouronet from the early 16th century. The head is well protected inside a round scull cap with a high riser in the centre of the spine. The face is covered by the small brim in the front and the two cheek flaps on the sides. Both flaps are punched with a floral pattern aside the ears to allow a better hearing.The helmet has an enlongened neckpiece, so that the part between cuirass and helmet is closed as well.The burgonet developed from the sallet in the 16th century and was, just behind the Morion, the most worn helmet in the 16th and 17th century.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€119.90*
%
Lena chest plate
The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm

€71.92* €89.90* (20% saved)

Customers also bought

%
Markward gorget
The gorget of the "Markward" series is not only special because of its rather technical design, it also differs in its construction from conventional plate gorgets. By a flexibly suspended throat element, the size can be varied there. This avoids that the gorget scrubs and presses on the throat. In addition, the two-part gorget was movably joined in the neck area. This also increases the wearing comfort significantly. The gorget "Markward" is well suited for all armor wearers who value functionality and comfort. Material: steelLength: 52 cmLength front part: 21cmTotal width: 38cmWeight: 3.8 Kg

€27.92* €34.90* (20% saved)
%
Roland shirt light cotton Discontinued
Discontinued, only while stocks lastThis classic shirt can be worn by men and women alike. The sleeves are cut wide from the shoulder down and have a broad wristband, which is closed with a single button. The shoulders and the collar are acentuated by the straight cut. The front is closed with laces. It is made of light cotton, so it is especially comfortable for the warmer days. XS S M L XL XXL XXXL HPS length 72 73 75 75 79 85 91 Chest circumference 122 130 142 144 158 166 180 Sleeve length 55 57 64 67 69 70 71,5 All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.Material: 100% Cotton

€14.95* €29.90* (50% saved)