Borg bracers

€34.90*

Delivery time 2-5 days

Colour

Product number: 988597

Our benefits

Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
Great Quality for low prices
Choose from 5.000+ items

Product information "Borg bracers"

Our "Borg" bracers are made from high quality leather. Simple, but well fabricated, they round off many cosumes.
They look great as a finish for your shirt sleeves and are closed by tieing them together.

Material: upper leather
Measurements: 23cm length, 14cm on top, 16cm on the bottom

Sold in pairs.

Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.

Accessory Items

Gold Quality leather grease

Leather is a very versatile material with lots of different properties. Shoes, accessories and armour can last, if maintained propperly, for many years. The "Gold Qualities" leather greases effectiveness is defined by its high percentage of bees wax - this is another reason for it cleaning your leather so good. It penetrates depply into the leather and seals it from dirt and moisture. Rub it gently into the leather by using a soft brush or cloth. After a short residence time the excessive grease is brushed off - appling too much grease will result in a saturation; the superfluent grease can be wiped off. Your leather product will let you know when you apply too much: we suggest to apply less grease, but more often. Not only leather can be taken care off with this grease, we suggest to clean steel armours light rust or polish drinking horns with it. Wooden articles profit from its bees wax ingredients as well. They will be protected effectively and recieve a new shine. Material: vaseline, bone marrow oil, genuine bees wax Colour: natural Volume: 190 ml

€8.90*

Customers also bought

Robin archers glove

A good friend for many archers: the glove on the drawing hand.A short glove with three complete fingers, Thumb and little finger are spared and not covered. The strap wrapping the wrist is used to tie the glove tight. The holes on thumb and little finger are seamed with smooth leather uppers.Using the glove will longen your fun shooting arrows - the drawing hand will be less stressed.Material: suedeSizes: S, M and L Glove sizes: Please see the following instruction to calculate the fitting size. Measure the palm from the outer base of the pointer across the palm to the outer base of the pinky. up to 9cm: We recommend Size S 10-11cm: We recommend Size M 12-13cm: We recommend Size L above 13cm: Unfortunately we don´t have this size in our range of goods.

€17.90*

Only 5 available

David chain mail

This chain shirt is slightly smaller and more intended for use without a gambeson. The chest circumference is relatively small, so we recommend it to younger or narrower built warriors. With a chest circumference from 70 cm to 95 cm. The chain-shirt is completely riveted under the armpit, so that even in strong movements the rings do not give in.Material: Spring steelClassic 4-in-1 patternShort sleeveRing diameter: 9 mmColour: blank, oil finish, browned

Variants from €79.90*

€89.90*

Lenora tiara cotton

The veil pictured is intended to demonstrate the function and manner of wearing the forehead band and is not included in the delivery. The "Lenora" tiara is part of a so called "Schapel" (circlet) head piece: a ring of cloth added to a basic head scarf. The combination results in the "Gebende" (wimple), a well known medieval headdress for women. Starting in the 12th century, it was unusual for married women to show their hair openly. A combination of veils and tightly bound scarfs, which were additionally bound underneath the chin, was the most common and widely used headdress. One purpose of this cloth tiara is its ornamental role; you can individually adorn this plain item with embroideries or fabric paint. Its second purpose is holding the veil or the wimple in place. The tiara itself has a circumference of approx. 56cm, but the size can be slightly adjusted by the amount of the veils and cloth worn underneath. The matching veil from the "Lenora" series can be found here. Material: cotton Head circumference: S = 54cmM = 56cmL = 58cmXL = 60cmXXL = 62cm Colour: cream

€11.90*

Markward bracers

Like all parts of our "Markward" series, these bracers are simple in design, but look lean and elegant just like the "Markward" greaves. This impression is enhanced by a burr along the midsection. Additionally the burr strenghtens the steel construct.Material: 1.2mm SteelColour: blank, brownedMeasurements: 25cm length, 20cm on top, 14cm on the bottom

€24.89*

Adam gorget

The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar. Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm Weight: 1 kg Colour: blank, browned

€34.90*