Product number:
973651
Our benefits
- Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
- Great Quality for low prices
- Choose from 5.000+ items
Product information "Crisso harness 2nd ED"
The "Crisso" harness is made of sturdy, very high quality leather. It is an asymmetric armor and, together with a leather spaulder, provides effective protection for the chest and shoulder from the side of the shield arm. This is especially interesting for lightly equipped rollers that carry a small shield. It is closed with a strap under the right arm. With elaborate punched ornaments, fine beadings and a decorative riveting, the "Crisso" harness is a fantastic addition to many light armor concepts. The leather spaulder "Crisso" can be perfectly combined with this extraordinary armor, but all the other leather shoulders of "Fucina del Drago" also fit.
Material: Upper Leather
Length: 97 cm-123 cm
Weight: 450 g
Colors: Brown & Black
Leather is a natural product and adopts dye products differently. The hue may differ from the picture.
Accessory Items
Gold Quality leather grease
€8.90*
Leather is a very versatile material with lots of different properties. Shoes, accessories and armour can last, if maintained propperly, for many years. The "Gold Qualities" leather greases effectiveness is defined by its high percentage of bees wax - this is another reason for it cleaning your leather so good. It penetrates depply into the leather and seals it from dirt and moisture.
Rub it gently into the leather by using a soft brush or cloth. After a short residence time the excessive grease is brushed off - appling too much grease will result in a saturation; the superfluent grease can be wiped off. Your leather product will let you know when you apply too much: we suggest to apply less grease, but more often. Not only leather can be taken care off with this grease, we suggest to clean steel armours light rust or polish drinking horns with it. Wooden articles profit from its bees wax ingredients as well. They will be protected effectively and recieve a new shine.
Material: vaseline, bone marrow oil, genuine bees wax Colour: natural Volume: 190 ml
Customers also viewed
Crisso harness 2nd ED
€69.90*
The "Crisso" harness is made of sturdy, very high quality leather. It is an asymmetric armor and, together with a leather spaulder, provides effective protection for the chest and shoulder from the side of the shield arm. This is especially interesting for lightly equipped rollers that carry a small shield. It is closed with a strap under the right arm. With elaborate punched ornaments, fine beadings and a decorative riveting, the "Crisso" harness is a fantastic addition to many light armor concepts. The leather spaulder "Crisso" can be perfectly combined with this extraordinary armor, but all the other leather shoulders of "Fucina del Drago" also fit.
Material: Upper Leather
Length: 97 cm-123 cm
Weight: 450 g
Colors: Brown & Black
Leather is a natural product and adopts dye products differently. The hue may differ from the picture.
Crisso leather spaulder 2nd ED
€59.90*
The shoulder "Crisso" is made to match the "Crisso" spaulder suspension. From these two armor parts, by the manufactory "Fucina del Drago", an asymmetric shoulder armour fits together. Made of four moving segments and decorated with a fine beading, the "Crisso" shoulder can be combined with each collar of "Fucina del Drago". However, only the spaulder suspension of the same name is designed to not slip in an asymmetric weight distribution.
Material: LeatherLength: 35 cmWidth: 41 cmColours: Black & Brown
Crisso leather spaulder 2nd ED
€59.90*
The shoulder "Crisso" is made to match the "Crisso" spaulder suspension. From these two armor parts, by the manufactory "Fucina del Drago", an asymmetric shoulder armour fits together. Made of four moving segments and decorated with a fine beading, the "Crisso" shoulder can be combined with each collar of "Fucina del Drago". However, only the spaulder suspension of the same name is designed to not slip in an asymmetric weight distribution.
Material: LeatherLength: 35 cmWidth: 41 cmColours: Black & Brown
Castagir hornsling
€11.90*
The hornsling "Castagir", from the house "Fucina del Drago" was decorated with elaborate, Celtic knot patterns. It is shaped slightly conical to its underside, so every horn sits securely in its place. Curved lines and an antique finish make this hornsling a very decorative piece, that highlights the unique "nordic" character of a drinking horn. For LARPer and medieval fans, it is a nice and practical accessory in which signal horns and upholstered weapons can also find their place well. Thanks to the sturdy leather lacing on the front, the diameter can be extended as you wish.Material: LeatherDimensions of the large variant:Diameter (with closed lacing):Top: 8 cm Bottom: 6 cmWidth of belt loop: 5 cmHeight: 6.5 cmWidth: 9.5 cmWeight: 46 g Dimensions of the small variant:Diameter (with closed lacing):Top: 6 cm Bottom: 5 cmWidth of belt loop: 5 cmHeight: 5 cmWidth: 7 cmWeight: 42 gAll measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Variants from €9.90*
Customers also bought
Crisso leather spaulder 2nd ED
€59.90*
The shoulder "Crisso" is made to match the "Crisso" spaulder suspension. From these two armor parts, by the manufactory "Fucina del Drago", an asymmetric shoulder armour fits together. Made of four moving segments and decorated with a fine beading, the "Crisso" shoulder can be combined with each collar of "Fucina del Drago". However, only the spaulder suspension of the same name is designed to not slip in an asymmetric weight distribution.
Material: LeatherLength: 35 cmWidth: 41 cmColours: Black & Brown
Yrsa pendant with runes
€1.50*
A rustic talisman of the Vikings, a so called "Oegishjalmr" from rustic cast brass.
Diameter 3.9 cm
Geralt sword holder diagonal
€49.90*
Made from thick upper leather, just like the complete "Geralt" series is, this diagonal sword holder is riveted in all neccessary places to be stable and durable. The black, powder coated buckles allow the holder to be adjusted to the diameter of the weapon it´s carrying - these provide the rough character of the sword holder. The distance between the two belt loops provides comfort when wearing and add an extra of stability when wearing it on your hip.Material: upper leather, steelLength: 32 cmWidth: 17 cmWeight: ~380 gr
Yorveth shortsword steel 2nd edition
€39.90*
The second edition of our popular foam weapons has been crafted from a new material. It's more tear-resistant than our previous foam and absorbs the impact energy better. Additionally, we've redesigned the grip wrappings, ensuring that you can always handle your foam weapon well and securely even in heated battles.
The single-edged shortsword "Yorveth" has an almost organic appearance. The slightly inclined pommel and the curved guard, with their fantastical lines and extraordinary shapes, evoke the armor of an insect or the scales of a dragon. "Yorveth" is the ideal foam weapon for characters from a nature-oriented culture such as elves or barbarians. Oriental characters can be equipped just as well with this sword as perhaps an orc. As always, imagination knows no bounds. This foam weapon is made from special PU foam and is largely resistant to weather conditions.
Material: PU Foam, FibreglassLength: 66 cm
Blade Length: 40 cm
Blade Width: 5 cm
Weight: 218 g
We recommend regular application of silicone oil for the maintenance of the foam weapon. Please note, in Battle Standard products, there may be a hole on the broadside of the blade near the tip due to production reasons. This is technically necessary to stabilize the core rod during the foaming process. Additionally, there may be further small superficial holes elsewhere. These holes do not represent defects and do not compromise the safety of the foam weapon.
Disclaimer: All items shown here have been specifically designed for safe combat representation in live-action role-playing, on theatrical stages, or similar settings. The foam weapons consist of a fiberglass core rod completely enveloped in soft foam to prevent injuries.