Markward belt shield

€14.90*

Prices incl. VAT plus shipping costs

Delivery time 2-5 days

Colour

blank

browned

Product number: 971110

Our benefits

Free shipping from 100€ (DE only)
Express-Shipping within 24h (DE)
Choose from 5.000+ items

Product information "Markward belt shield"

The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint.

Material: 1,2 mm steel
Length: 24 cm
Width: 18 cm
Weight: app. 350 g
Colour: blank, browned

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

€3.90*

Details

Customers also viewed

Markward belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

€13.90*

Arthur gambeson set black

The parts of the "Arthur" gambeson series are stiched in diamond-shape. This allows a good mobility without reducing the protection. The vest is closed by four roll buckles on the front. At the armholes and at the bottom hem, it is fogged with brass eyelets on which the sleeves and tassets are fixed. The collar is finely quilted. This brings more comfort and agility to the neck area. The elbows are additionally upholstered. The complete set of the ' Arthur ' series with vests, sleeves and tassets is available in black and brown. "Arthur " is slightly thinner and therefore very comfortable to wear under plate armor. Of course, this fine set of gambeson can also be combined with any chain armor. Material: Cotton canvas, Polyester, suedeSizes: S-XXLColours: black & brown

€149.90*

Lucas belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

€11.90*

Felix greaves

The "Felix" greaves for small heroes and heroines are made from extremely sturdy leather, very flexible and offer protection against bruises etc. while fighting with padded swords, or when playing in the woods. We recommend to combine them with our padded greaves, to enhance the comfort of wearing. Material: split leatherColours: brown, blackLength: 26cmWidth: 21cm

€21.90*

Customers also bought

Adolar belt

A simple belt made from split leather with a brass buckle. Use it as a weapon carrier or as a fine detail on your costume.Length: 156cmWidth: 3,5cmMaterial: split leather, brass

€19.90*

Borchard beltbag Canvas large green

A really nice beltpouch made from heavy-duty canvas. It offers all the space you need outdoors. There are two beltloops on the backside and it is closed with a button/loop in the front. Measurements app.: Length: 19cm Width: 3,5cm Higth: 14cm Width of beltloops: 5cm Material: Canvas

€11.90*

Tip

Bruna water bottle

The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET Capacity: 1.5 litres Length: 25 cm Width: 8 cm Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

€49.90*