Katharina Tassets

69,90 €*

Tiempo de entrega 2-5 días

Color
Número de producto: 963138
Nuestras ventajas
  • Envío gratuito a partir de 100€ (DE)
  • Envío exprés en 24h (DE)
  • Elija entre más de 5.000 artículos
Información sobre el producto "Katharina Tassets"
The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg.
Material: Steel
Length: 29 cm
Width Top: 18 cm

Kunden haben sich auch angesehen

Katharina Greaves
The Katharina greaves feature a classic cut adorned with a graceful curved element, echoing the design found on the bracers and tassets of the Katharina armour. They are secured with two sturdy straps, allowing for adjustable sizing. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel Length Side: 26 cmLength center front: 33,5 cmWidth at ankle: 12 cm

99,90 €*
Lena chest plate
The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm

89,90 €*
Katharina Bracers
The bracers of the Katharina armour are designed with a shorter length, seamlessly aligning with the elbow tile of the modular arm guard. They are adorned with a graceful curved element, mirroring the design found on the greaves and tassets. These bracers are also available in an economical set with the greaves.All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.Material: Steel Length (Side): 17.5 cm Length (Center): 22 cm Width (Wrist): 11.5 cm

79,90 €*
Katharina Armor Belt
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is fastened with a wide leather strap at the back. The size of the armour belt can be adjusted individually using the strap and by carefully bending it. The tassets are attached to the four front straps, which we offer separately, as well as in a convenient set along with the armour belt. Other tassets from our 'Mytholon Artware' armours can also be combined with these armour belts, such as Lambert, Galahad, Ortwin, or Edward. All parts of this armour are naturally fluted to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel off over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel.Width Center Front: 22,5 cmWidth Side: 9,5 cmLength Metal: 66 cmEntire Length: 83 cm - 115 cm

69,90 €*
Katharina Tassets
The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: SteelLength: 29 cm Width Top: 18 cm

Variantes de 69,90 €*
74,90 €*

Kunden kauften auch

Katharina Armor Belt
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is fastened with a wide leather strap at the back. The size of the armour belt can be adjusted individually using the strap and by carefully bending it. The tassets are attached to the four front straps, which we offer separately, as well as in a convenient set along with the armour belt. Other tassets from our 'Mytholon Artware' armours can also be combined with these armour belts, such as Lambert, Galahad, Ortwin, or Edward. All parts of this armour are naturally fluted to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel off over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel.Width Center Front: 22,5 cmWidth Side: 9,5 cmLength Metal: 66 cmEntire Length: 83 cm - 115 cm

69,90 €*
Philipp pants cotton black
One could say, that "horses forced humans into wearing pants." The oldes known pants were found close to thewest chinese city of Turfan. Some 3200 years old, it was the typical legwear of the mounted warrior. Counting as a piece of "barbaric" clothing in most of Europe, it spread very quickly and became one of the most common garments in todays culture. The simple cut of the "Philipp" pants make it a very universal garment for many different costumes. Be it wide overgarment or underneath a full plate armour - the generous cut and the high waisband provide the neccessary movability in all situations. An additional lace tying on the waist allows a tight fit for any wearer. The airy cut and the moisture absorbing traits make this the ideal summer pants. They will look great not onbly on a medieval market, LARP event or on the battlefield: this summer could use them well as slacks... even without a horse.Material: cotton

34,90 €*
Diana gambeson black
The "Diana" gambeson is a specialty in our line of products due to its design. With 6 lacings in the front and its sidecuts, it can easily be adjusted to the wearer. The long sleeves are closed with an additional lacing. The different stitchings let you move freely while providing protection against rashes and bruises. The gambeson is lined with light cotton. Material: Cotton, polyester, leatherSize: S-XXL

119,90 €*
Felice blouse cream
The "Felice" blouse is made from light cotton and has wide cuffs. It is perfect for combinations with skirts and vests. It is closed by means of strings in the front.Material: 100% Cotton

24,89 €*

Zuletzt angesehen

Solo 5 disponible
Sina skirt canvas
Sina is a wide cut skirt, which matches many costume ideas.The skirt itself falls wide from the hip down, due to the gussets on the side. Close it by using the tie string and wear the tieing in the front or in the back. The cuff is doubleed, so its harder and allows the skirt to fit comfortably on the hip.Material: canvasSizes: from S to XLColours: black

29,90 €*
Solo 1 disponible
Diana gambeson black
The "Diana" gambeson is a specialty in our line of products due to its design. With 6 lacings in the front and its sidecuts, it can easily be adjusted to the wearer. The long sleeves are closed with an additional lacing. The different stitchings let you move freely while providing protection against rashes and bruises. The gambeson is lined with light cotton. Material: Cotton, polyester, leatherSize: S-XXL

119,90 €*
Sawyer shirt light cotton
The Sawyer shirt, made of lightweight cotton, is perfect for adventures on warm days. The neckline and sleeves can be loosely laced, and the shirt falls wide and loose. The broad collar evokes images of pirates and musketeers, making Sawyer an ideal garment for many occasions, whether in LARP, at the market, or in daily life.Material: 100% Cotton M L XL XXL XXXL Chest circumference 116 124 133 141 150 Hip circumference 120 128 137 145 154 Width of shoulders 44 46 48 50 50 Sleeve length 73,5 74 74,5 75 75 HPS length 82,5 83,5 84,5 85,5 86,5 All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.

29,90 €*
Recomendación
Fletcher Vest
The vest „Fletcher“ from our „7 Seas“- series is fashioned in a typcial Burda-Cut. „Fletcher“ is short and sleeveless, which makes it possible to wear a shirt underneath comfortably. With its buttons from brass, the vest can be worn opened or closed equally. Cuttings at the sides provide agility, furthermore the width of the vest can be adjusted through a strap at the back. The pockets in the front are just implied for decoration. „Fletcher“ is suitable for any Pirate or Seamen character and can be neatly combined with one of our shirts (e. g. „Tilly“). Material: 100% cotton

39,90 €*